.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?

extended search


Singer 18-23 Sewing machine
Manufacturer:
Model:
18-23
Date:
1935
Class:
Type:
SubType:

Information

The Class 18 Machines, described in the following list, are each provided with cylinder bed. disc balance wheel at left hand side, hollow needle bar, and swing back type of bobbin winder for attachment to table. They are designed for vamping shoes, etc., and for stitching other varieties of work in light and medium weight leathers. A flat work plate which can be readily attached or detached is furnished when specified on order. Machine 18-22 has one needle and a long beak shuttle, a roller presser and a drop feed at the left of the needle. The cylinder bed is 2x/i inches in diameter and U)}X2 inches in length from the needle to the base of the arm. It, is used for shoe work. Machine 18-23 has one needle and a long beak shuttle, a roller presser and wheel feed at the left of the needle. The cylinder bed is 2Y2 inches in diameter and H)}^ inches in length from the needle to the base of the arm. It is used for shoe vamping and other work in leather. Machine 18-25 has two needles and two long beak shuttles, a roller presser and drop feed at the left of the needles. The cylinder bed is 2J/<i inches in diameter and 10% inches in length from the left hand needle to the base of the arm. The distance between the two needles may be from ä’2 to 1,f inch as desired. It is used for shoe vamping and other work in leather. Machine 18-26 has two needles and two long beak shuttles, a roller presser and wheel feed at the right of the needles. The cylinder bed is 2l/2 inches in diameter and lO)^ inches in length from the left hand needle to the base of the arm. The distance between the two needles may be from 3 to } ginch. It is used for shoe vamping and other work in leather. Machine 18-27 has one needle and a central bobbin shuttle, a roller presser and drop feed at the left of the needle. The cylinder bed is 2 inches in diameter and 10J^ inches in length from the needle to the base of the arm. It is used on children’s shoes and other articles having a small opening. Machine 18-35 has one needle and a long beak shuttle, a roller presser and drop feed at. the left of the needle. The cylinder bed is 2}/2 inches in diameter and Γ>5^ inches in length from the needle to the base of the arm. It is used for general work in leather. Machine 18-36 has two needles and two long beak shuttles, a roller presser and drop feed at the left of the needle. The cylinder bed is 23^ inches in diameter and 53^ inches in length from the left hand needle to the base of the arm. The distance between the needles may be from ^ to ) inch, as desired. It is used for vamping shoes and other work in leather. Machine 18-37 has one needle and a long beak shuttle, a roller presser and wheel feed at the left of the needle. The cylinder bed is 2x/2 inches in diameter and 5^ inches in length from the needle to the base of the arm. It is used for general work in leather.

show more

User Manual
Manual type:
User Manual
Pages:
10
Size:
501.46 Kbytes (513492 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
unknown
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2015 11 15
MD5:
6706e06a70e75f069e0b9fb4b7ec2b09
Downloads:
3903

Add Comment

* Required information

Comments

No comments yet. Be the first!