.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?

extended search


Advantest Corporation U3661 Spectrum analyzer
Manufacturer:
Model:
U3661
Date:
1999
Class:
Type:
SubType:

Information

The U3661 is a very portable Spectrum Analyzer. That has been developed to be used for maintenance inspections and the like in location always from the lab bench and often out of doors in field. This Analyzer is small and light (about 8.5 Kg), and it has a color LCD display. To further increase portability, there are three-power supply choice: A removable battery, AC/DC Adapter or an external DC supply. In these range, the Analyzer features a maximum resolution of 1 kHz (100 Hz with option 26), a residual FM of 60 Hzp-p, and noise sideband of -100 dBc/Hz (at 10 kHz from the carrier). The Analyzer equipped with GPIB remote control, RS232 remote control and memory card function for saving and recalling waveform data and panel setting. The Analyzer provides the following additional features Three Power supply source: battery, AC/DC adapter and external DC supply. The ability to sweep over a wide frequency range: 9 kHz to 26.5 GHz. A precious measurement mode that uses the analyzer’s built-in reference crystal to measure with 1 Hz accuracy signals too weak to measure with a Counter. Preamplifier, which is equipped with the gain 15 dB, or more in the frequency range 9 kHz to 3 GHz. A memory card that can store waveform and control settings. A digital memory LCD screen that displays signal trace without flickering. Digital memory also allows to marker functions for accurate and easy reading of trace values. A zero span mode that allows the Analyzer to be set to a sweep time of 50 s. Two independent channels of digital memory for simultaneous display of two traces. Computer-controlled operation using GPIB command set. The Analyzer is equipped with delay-sweep function. Option 20 is the high stability 10 MHz Oscillator for more accurate measurement. Option 26 is the active Filter to have 100 Hz to 300 Hz resolution bandwidth. Option 72 is TV signal demodulator, such as NTSC, PAL and SECOM. Option 74 is tracking Generator to allow measuring amplitude characteristics of devices.

show more

Service Manual
Manual type:
Service Manual
Pages:
124
Size:
3.34 Mbytes (3497317 Bytes)
Language:
english
Revision:
Manual-ID:
FME-8339628A00
Date:
1999 11 19
Quality:
Scanned document, all readable.
Upload date:
2016 08 17
MD5:
a5b6579e43ab4f6e91173d81bfc40504
Downloads:
833

Information

This manual provides information to perform unit or assembly level troubleshooting included removal/installation procedures of instrument’s module assemblies and a parts list. This manual is intended for use by trained service personnel only. Detailed operation and programming information is excluded from this manual. Including only sufficient information for service purpose. For more detailed operation information, refer to the U3661 spectrum Analyzer operation manual. WARNING! The information in this manual is for use of Service Trained Personnel only. To avoid electrical shock, do not perform any procedures in this manual or do any servicing to the U3661 unless you are qualified to do so. This manual has information the following six chapters. 1. GENERAL INFORMATION It provides description of this manual and brief product information, Specification and Test equipment required for performance verification. 2. THEORY OF OPERATION It provides the principle of measurement. 3. PERFORMANCE VERIFICATION TEST PROCEDURE It provides the procedures for performance verification test and performance verification test record sheet. 4. ADJUSTMENT PROCEDURE It provides the adjustment procedures for instruments, in case of required adjustment. 5. TROUBLESHOOTING It provides the diagnostic procedure including the removal of defective module and installation procedures. 6. PARTS LIST It provides the replaceable parts list.

show more

Add Comment

* Required information

Comments

No comments yet. Be the first!