Boonton Electronic - 7200 - Level Meter
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Boonton Electronic 7200
you can
upload the files here.
Equipment:
7200
Date:
1996
Category:
Group:
Sub Group:
Information
The Model 7200 is a microprocessor-based capadtancc meter
which provides fully automatic, 1 MHz capacitance and loss
measurements. Its operating capacitance range is 0 to 2000
pF, and its conductance range is 0 to 2000 pS. The following
features make the Model 7200 suitable for a wide variety of
applications.
a. Versatile Displays. The Model 7200 measures the parallel
capacitance and conductance of the device under test From
these measured parameters» it can calculate and display the
equivalent series and parallel resistance, series
capacitance, dissipation factor, and quality factor.
Capacitance can also be displayed as a deviation from a
programmable reference value in % or pF units.
b. Accuracy. The base accuracy of Model 7200 for capacitance
measurements is 025 % of reading -t- 02 % of full scale +
0.005 pF, and the basic accuracy for conductance
measurements is US % of reading +- 2j0 % of full scale +
0.05 fiS + 2(coC)2, where C is the parallel capacitance in
Farads.
c. Programmable Bias and Test Level. The Model 7200 utilizes
a 1 MHz test signal with programmable levels of15,30,50, or
100 millivolts. It accepts, measures, and displays external
DC bias voltages over a range of ± 200 volts. An internal
bias power supply is programmable over a ± 100 volt range.
Bias voltages of either polarity can be applied to the HI
test terminals. This bias capability with fast responding C,
G, and V outputs makes the instrument ideal far C-V or G-V
semiconductor plots, as well as DLTS material studies.
d. Wide Zeroing Range. The Model 7200 can zero stray
capacitances of up to2000pF automatically with a single
keystroke. As a result of this wide zeroing capability, the
range of the instrument can be effectively increased to 4000
pF by first zeroing the instrument with a 2000 pF specimen
connected to the input terminals.
e. Ease of Operation. Human engineering con-
sidérations have been emphasized in both the mechanical and
electrical design of Model 7200. Measurement modes, test
signal levels, bias voltages, and reference capacitance and
conductance values are easily programmable with front- panel
keystrokes. Ranging and measurement are fully automatic.
Measured values and settings are displayed on a 20-character
vacuum-fluorescent display with of measurement to minimize
the possibility of misinterpretation. LEDs indicate active keys.
f. Panel Setup Storage and Recall. The Model 7200 can store
up to 99 complete panel setups in nonvolatile memory. Each
stored setup can be recalled by entering the stored program
number either locally or through the GPEB bus. This feature
is especially useful when a series of often- repeated test
sequences needs to be performed.
g. IEEE-488 interface. The Model 7200 uses a microprocessor
with a fixed internal program for automatic control of all
measurement, computation, and display functions. The use of
a microprocessor facilitates interfacing with ATE systems.
The Model 7200 is equipped with a full-function IEEE-488 bus
interface. All front panel control functions, with the
exception of the PLOT and LCL/INIT key functions, are
remotely programmable. For rapid data transfer, C, G, and V
information is available simultaneously.
h. Analog Outputs. Analog voltages proportional to measured
values of capacitance, conductance, and bias are
continuously available at rear panel connectors for
application to an analog plotter.
i. Remote Measurements. Because of its tolerance of loading
capacitances, the Model7200 is particularly useful for
measurements at a point remote from the front panel test
terminals, such as in environmental chambers, in areas of
harmful radiation, or in component handlers for production
testing.
j. Special Functions. A variety of special functions are
provided to extend the operational capabilities of Model
7200 to meet specific requirements. The instrument can be
configured to hold a particular measurement range when
parameters of test specimens fall within a known range.
Measurement limits can be programmed, and the instrument
will indicate if the measurements for the test specimen are
above or below these limits.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
100
Size:
6.1 MB
Language:
english
Revision:
Manual-ID:
983026000
Date:
January 1996
Quality:
Scanned document, all readable.
Upload date:
Jan. 23, 2017
MD5:
e9603487-d17c-9087-1dfa-86bcd633871b
Downloads:
604