BK Precision - 4017B - Generator
Manufacturer:
Equipment:
4017B
Date:
2006
Category:
Group:
Sub Group:
Information
The B&K Precision Model
4017B Sweep/Function
Generator is
the newest 40XX family member. The
4017B enhances the
performance achieved by its successful predecessor, BK
Precision Model 4017A Sweep/Function Generator. These
performances are achieved by using direct digital waveform
synthesis (DDS) techniques for generating high accuracy and
precision frequencies. A high performance Digital Signal
Processor (DSP) controls every aspect of the DDS system, and
is used for precise generation and processing of waveforms.
The
4017B has a vast number of applications in both analog
and digital electronics, in the engineering, manufacturing,
servicing, educational and hobbyist fields. This versatile
signal source is capable of generating waveform (such as
sine, triangle and square), pulse generation (through
variable symmetry) and frequency sweep. Additionally, the
instrument provides a built-in frequency counter.
The core of the function generator is a DSP, which is used
to generate precision sine, square or triangle waveforms
over 0.01Hz to 10MHz range. This encompasses subaudible,
audio, ultrasonic and RF applications. The symmetry of the
waveforms can be changed between 0% to 100% in 1% step,
converting the instrument to a pulse generator capable of
generating rectangular waves or pulses, ramp or sawtooth
waves and slued sine waves. An external voltage may be used
to control operating frequency that can be changed using a
ratio between 1:1 and 1:100. Frequency sweep can be adjusted
by changing the rate and the time sweep, and also the manner
in which frequency is changed, linear or logarithmic.
The B&K Precision Model
4017B has 3 jacks: 2 for output and
1 input. The OUTPUT jack is the main signal output. The
TTL/CMOS jack is a TTL/CMOS compatible square wave output.
The VCG/SWEEP jack is an input used for controlling the
operating frequency and input to frequency counter.
The
4017B is capable of supplying an output level of 20.0Vpp
with an offset voltage of ± 10.0Vpp (unloaded) on the main
signal output, the OUTPUT jack. The output impedance is 50
ohms; therefore the 50 ohm loaded output level is 10.0Vpp,
with an offset voltage capability of ±5.0 Vpp. The output
level can be adjusted with a resolution of 1mV and 10m V,
depending on the level range being worked on. The offset
level can be adjusted with a resolution of 1mV.
The
4017B is capable of generating a TTL/CMOS compatible
square wave on TTL/CMOS jack. The output level can be up to
14.0 Vpp (unloaded).
On the VCG/SWEEP input jack, DC levels can be applied
between 0V to 10.0V in order to change the output operating
frequency with a ratio between 1:1 and 1:100. This jack is
also used as a frequency counter input, for frequencies
between 5Hz and 100MHz.
The front panel of the Model
4017B includes LCD display,
buttons, “intelligent” knobs and an LED in order to operate
the unit quick and easy. The “intelligent” knobs are one of
the main features of this new model, which reduces the
number of controls needed for changing the value of a
parameter. The LCD display is a large 2-line 16 columns back
lighted display.
The unit also features an EIA-RS232 connector on the rear of
the unit. This permits the user to remote control the 4017B
using ASCII characters. No special hardware or protocols are
needed; any dumb terminal or computer serial port can be
used. The baud rate is fixed to 9600 BPS.
User manual
Manual type:
User manual
Pages:
41
Size:
1.0 MB
Language:
english
Revision:
Manual-ID:
Date:
January 2006
Quality:
Scanned document, all readable.
Upload date:
Jan. 25, 2017
MD5:
0ba34341-2240-fba7-84e0-ea789fbc24cb
Downloads:
336