The B & K-PRECISION Model 3010 Function Generator is a versatile signal source that can be used in a variety of engineering, industrial, educational and hobbyist applications. The wide frequency range (.1 Hz to 1 MHz) for all functions (sine, square, triangle and TTL output) encompasses subaudible, audio, ultrasonic and RF applications. The continuously variable DC offset control and provision for external VCO control further enhance the versatility of this instrument. The human-engineered case lends itself to bench use as well as easy portability. SPECIFICATIONS GENERAL Basic Outputs Frequency Range External Frequency Maximum Input Input Impedance Square, sine, triangle, DC and TTL Square Wave 0.1 Hz to 1 MHz in six ranges. VCO; greater than 100:1 on any frequency range (linear). With FREQUENCY dial set at .1, a 0-to-5.5V ramp input will produce a 100:1 frequency change. Frequency increases with positive ±20 V peak. 1000 ohms, nominal. SPECIFICATIONS (All specifications apply with dial scale between 1 and 10) Dial Accuracy 5% of full scale to 500 kHz, 8% of full scale Dial Range Output Impedance Output Amplitude from 500 kHz to 1 MHz (includes dial scale accuracy and range-to-range accuracy). Unit calibrated at full scale. Greater than 100:1. 600J2, ±5%. 20 V p-p open circuit; 10 V p-p into 600S2. Amplitude Control Continuously variable, greater than 30 dB range.