Hameg - HM407-2 - Oscilloscope
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Hameg HM407-2
you can
upload the files here.
Equipment:
HM407-2
Date:
2003
Category:
Group:
Sub Group:
Information
40MHz Analog-/Digital-Scope HM407-2
Auto-Set, Save/Recall, Readout/Cursor, RS232 Interface
Analog: 2 x DC-40MHz, max. 1mV/div, Timebase 0.5s/div -
10ns/div Triggering DC - 100MHz, Component Tester, 1MHz
Calibrator Digital: Max. Sampling Rate 100MSa/s, Timebase
100s/div - 20ns/div Storage 2 x 2048 x 8 bit, Reference
Memory, Post/Pre-Trigger Storage Modes: Refresh, Single,
Roll, Average and Envelope
The worldwide success of HAMEG's HM205 and HM305 has led to
the introduction of the new microprocessor controlled
HM407-2 Analog/Digital oscilloscope. This instrument offers
much more performance and specifications over its
predecessores. The HM407-2 incorporates a
microprocessor-based system that extensively automates
operation. The majority of signals can be displayed by
simply pressing the "Autoset" button. A "Save/Recall"
function is available for storing frequently used setup
parameters.
The increased maximum sampling rate of 100MSa/s now allows
to capture a 10MHz signal in "Single" mode with 10 samples
(dots) per period. The automatic Dot-Join function provides
linear connections between the captured points, ensuring
that all digitized signals are displayed without gaps. New
features are the two reference memories, allowing their
contents to be compared with the live signal at any time.
Cursors can be activated for waveform measurements. All
important parameter settings are displayed on the CRT
screen. The built-in RS232-Interface enables remote control
operation and signal processing via a PC.
Unique in its price range is also the analog section of the
HM407-2. The increased bandwidth of 40MHz (-3dB) allows the
stable display of signals up to 100MHz. As always, the
Component Tester with one-button control is a standard
feature in the HM407-2. This is also true for the switchable
1 kHz/1 MHz Calibrator which permits you to check the
transient characteristics from probe tip to the screen at
any time.
All in all, the new HM407-2 presents itself as a practical
hands-on oscilloscope for today's progressive measurement
requirements offering a price/performance ratio that sets
new standards world-wide.
1 Manual
Service manual
Manual type:
Service manual
Pages:
40
Size:
6.8 MB
Language:
english
Revision:
Manual-ID:
4S-0407-02E0
Date:
July 2003
Quality:
Electronic document, no scan, very well readable.
Upload date:
Aug. 28, 2017
MD5:
a9c1fa7f-d67b-8d4c-ff5d-2a2ef2f0ac7f
Downloads:
1052