Fluke - 8502AT - Digital multimeter
Manufacturer:
Equipment:
8502AT
Date:
1981
Category:
Group:
Sub Group:
Information
The
8502AT is an
8502A that has been altered to operate at
400 Hz ±5% and has a Thermal True RMS
Converter module
installed. In addition the -02 Ohms Converter, -04
Calibration Memory, -05 IEEE Interface, and -08 A Isolator
Options are included as standard. The Thermal True RMS
Converter module allows the operator to measure the true rms
value of an ac signal at accuracies of 50 ppm with a maximum
response time of 6 seconds. This response time compares
favorably with that of existing thermal transfer standards
which can take up to 5 minutes to complete a measurement.
Multimeter operation at 400 Hz results in readings that are
5% slower than the standard 60 Hz unit. The 5% slower
readings are based on timing of 57 Hz which occurs when the
input line frequencies are at 400 Hz ±5%.
Service and user manual supplement
Manual type:
Service and user manual supplement
Pages:
64
Size:
5.4 MB
Language:
english
Revision:
Manual-ID:
577049
Date:
July 1981
Quality:
Scanned document, all readable.
Upload date:
Jan. 14, 2018
MD5:
04b4a2ab-0b6b-8fba-26b8-d422f514c75d
Downloads:
673