.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?

extended search


Emtron DX-3 Amplifier
Manufacturer:
Model:
DX-3
Date:
2005
Class:
Type:
SubType:
Linear Amplifier

Information

The Emtron DX-3 Linear Amplifier is a 3000 watt average output power, for the 160m through 10m amateur bands (9 bands), housed in a desk-top cabinet with self-contained Power Supply and cooling system. It utilises a single high performance tetrode, type GU78B (4CX3000A), a ceramic metal tube with a plate dissipation of 2500W. The tube is air cooled by a commercial grade forced air turbine blower system under the chassis and a computer type fan sucking air and positioned above the tube. Both fans operate at two speeds, controlled by a temperature sensor. Tetrodes offer exceptionally stable operation and levels of quality performance far exceeding that which can be expected from triodes. The harmonic output and intermodulation distortion achieved with this tube are exceptionally low. This is especially important when dealing with a high output power. The Emtron DX-3 is supplied as standard with a host of features including solid state metering, comprehensive protection systems and very long duty cycle. In addition, a unique Emtron QSK module allows for extremely rapid switching times between transmit and receive, with consequent advantages when using CW or the digital modes. QSK is standard in all DX-3 amplifiers. Operation of the DX-3 is greatly simplified by the absence of meter switching, mechanical display and front panel level setting controls. The front panel moving LED display systems indicate simultaneously: the output forward and reverse power, screen grid current (positive and negative), the plate voltage and the plate current, while 5 single LED’s indicate: Ready, Overdrive warning, High SWR cut-off indication, On Air and Fault. The Emtron Electronic Bias Switch (EBS) automatically switches the standing current (typically 0.75 A) off when there is no modulation. This reduces the average tube dissipation. On initial switch on, the unique Emtron "soft start" circuitry ensures that no damaging AC surge currents are generated. Professional, fine output tuning adjustment is possible, due to the 6: 1 reduction mechanism fitted.

show more

User Manual with schematics
Manual type:
User Manual with schematics
Pages:
42
Size:
1,017.23 Kbytes (1041641 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2013 11 19
MD5:
4a94e2e5752fa96b2f3ee6cd60ca0863
Downloads:
1203

Add Comment

* Required information

Comments

No comments yet. Be the first!