Electronic Measurements Inc. - EMS Series - Netzteil
Hersteller:
Kein Bild verfügbar!
Vielleicht können sie für ein
Electronic Measurements Inc. EMS Series ?
Ein
Foto hochladen
?
Weitere Anleitungen und Fotos für ein
Electronic Measurements Inc. EMS Series
können sie
hier hochladen.
Gerät:
EMS Series
Datum:
Kategorie:
Gruppe:
Untergruppe:
Informationen
The EMS series has been developed specifically for
laboratory test and burn-in applications.The EMS supplies
produce a well regulated variable DC voltage or current
source. All models provide AC turn on/off capability and
circuit protection. Output control is provided by a ten turn
voltage control and a one turn current control with
monitoring of each by front panel meters. These meter can be
optionally selected for either analog or digital display for
the 2KW, 2.5KW and 5KW series. The 1KW series offers digital
display only.
The input AC is rectified and filtered to provide an
unregulated high voltage (265V - 350V) DC bus, which is
converted to high frequency AC for transmission through a
high frequency power transformer. This AC is then rectified
and filtered to provide a low ripple DC output. Control is
achieved by means of a dual-channel amplifier, for both
voltage and current control, that furnishes full rated
output voltage at the maximum rated output current or can be
continuously adjusted throughout all of the output range.
All supplies can be controlled locally at the front panel or
remotely by external voltage, current or resistance on the
rear programming strip.
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
61
Größe:
2,2 MB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
3. Oktober 2016
MD5:
5de0f0df-5f14-1b64-cbda-cc73eae43b1b
Downloads:
622