Electronic Navigation Industries - A-300 - Verstärker
Hersteller:
Bild 1 von 1
Weitere Anleitungen und Fotos für ein
Electronic Navigation Industries A-300
können sie
hier hochladen.
Gerät:
A-300
Datum:
Kategorie:
Gruppe:
Untergruppe:
Informationen
The ENI Model A300 is an all solid state amplifier which has
a flat frequency response from .3 MHz to 35 MHz. It provides
300 watts of linear power with low harmonic and
intermodulation distortion. Gain is 55 dB nominal, with a
variation of less than ± 1.0 dB over the entire frequency
range. Input and output impedance are 50 ohms and the unit
may be driven to full power output by most RF synthesizers,
signal generators and swept signal sources.
The ENI Model A300 will deliver its rated power output into
any load impedance, regardless of match. Built-in protection
circuitry will absorb the power reflected from a mismatched
load without causing failure or oscillation.
Output RF voltage is displayed on the front panel meter. The
Model A300 is packaged for bench mounting and is shipped
with rack mounting adapters. Its integral power
supply and cooling operate from a 115 or 230 V ac 50/60 Hz
main supply.
The Model A300 will raise the power level of signal sources
and generators without requiring tuning or band- switching.
The Class A linear circuitry will amplify signals of AM, FM,
SSB, TV and complex modulations limited only by their peak
input and bandwidth, with minimum distortion.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
31
Größe:
1,6 MB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
25. Januar 2016
MD5:
8831ab8f-d7b5-899c-ed06-5e1324208e5a
Downloads:
453