Fluke - 415B - Netzteil
Hersteller:
Gerät:
415B
Datum:
Kategorie:
Gruppe:
Untergruppe:
Informationen
1-3. The Model 415B High Voltage Power Supply is a stable
well regulated source of dc voltage. The Model 415B is
capable of providing 0 to 3100 volts dc and 0 to 30
milliamperes current. The output voltage is adjustable in
steps of 500, 100, 10 and 1 volt by front panel step switch
controls. A vernier control provides a means of fine
adjustment within the one volt steps. Output power is
available from both a front and rear panel high voltage
connector, type UG931/U, Output voltage polarity may be
switched by a front panel control to provide either a
positive or negative output with respect to chassis ground
of the instrument.
1-4. The power supply is provided with an overcurrent
protection circuit to prevent damage to the instrument in
the event of overload or accidental short circuit at the
output. Normal operation is quickly restored by a manual
reset control following removal of the overload.
1-5. The Model 415B combines the best features of electron
tubes and solid state components in a hybrid circuit. The
improved reliability and temperature stability
characteristics of silicon transistor amplifiers and
rectifier diodes together with the high voltage handling
characteristics of vacuum tubes provide a dependable, low
noise level, highly regulated output. Applications of the
Model 415B include calibration of voltmeters and powering of
photomultiplier tubes, high voltage klystrons or other
devices with current requirements up to 30 milliamperes.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
92
Größe:
3,3 MB
Sprache:
englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
10. Februar 2016
MD5:
ece595a8-2078-5c14-761d-1fab2f7b1065
Downloads:
934