Tektronix - 577-177 D2 - Test Set
Hersteller:
Gerät:
577-177 D2
Datum:
1981
Kategorie:
Gruppe:
Untergruppe:
Informationen
The 577-177-D1 (Storage) or D2 {Non-Storage) Curve Tracer
system is a dynamic component tester that permits display of
characteristic curves of many types of devices, including:
bipolar transistors, field effect transistors,
silicon-controlled rectifiers, uni-junction transistors,
MOS- FETS, integrated circuits, light coupled devices,
capacitors, and relays.
The D1 Display Unit features Split-screen storage, 6 1
/2-inch CRT, variable stored brightness, and a beam finder.
The D2 Display Unit features a 6 1 /2-inch CRT and a beam
finder.
The features of the 577 Curve Tracer are:
A collector supply variable from 0 to 1600 volts in several
operating modes, including AC. The current available varies
from 10 A {20 A Pulsed) on the lowest voltage range to 40 mA
(80 mA Pulsed) on the highest voltage range. The collector
supply power is set using a switch that changes series
resistance to maintain the same peak power setting as the
voltage range is changed. The collector supply is
automatically disabled when the vertical display exceeds
2.5 screen dimensions, helping to protect the device under
test from destructive currents.
Switching the collector supply polarity automatically
changes the polarity of tile step generator and re-positions
the display start to the appropriate position on the CRT screen.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
58
Größe:
3,0 MB
Sprache:
Englisch
Revision:
revised
Dokument-ID:
070-1436-00
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
24. November 2014
MD5:
73da2175-408b-f16b-8b4b-ff9745d301a2
Downloads:
1117