Tektronix - DC 510 - Zähler
Hersteller:
Gerät:
DC 510
Datum:
1981
Kategorie:
Gruppe:
Untergruppe:
Informationen
Instrument Description
The Tektronix DC 510 is a universal Counter timer Plug-In It features reciprocal Frequency, Period, Ratio, and Events
B During A measurements to 350 MHz. For timing measurements,
the Time Interval, Width, Risetime and Falltime functions
feature 3.125 nsec single-shot resolution. For these
measurements, averaging and identical A and B channels
provide increased accuracy. Also included is a time manual
mode, as well as three 350 MHz Totalize modes (A, A+B, and
A-B). The DC 510 also has an auto-trigger feature, a Probe compensation feature, an auto averages function, and
an extensive set of automatic power-up self tests.
The DC 510 has a DVM mode that reads out the channel A and
channel B trigger level voltages. Shaped outputs and an
arming input are available at the front panel. Also
available at the front panel is a signal for use with the Probe compensation function.
The DC 510 can be equipped with an optional,
oven-controlled, 10 MHz crystal Oscillator to obtain an even
more stable and precise internal time base.
A GPIB conversion kit (Field Modification Kit 040-1023-00)
for the DC 510 is available from Tektronix Inc.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
153
Größe:
38,0 MB
Sprache:
englisch
Revision:
revised
Dokument-ID:
070-3552-01
Datum:
Oktober 1981
Qualität:
Gescanntes Dokument, alles ist lesbar.
Upload Datum:
30. Dezember 2017
MD5:
5d625564-efe7-b527-7308-7590803e9616
Downloads:
875
Downloads letzter Monat:
3
Informationen
LIST OF ILLUSTRATIONS...iii
LIST OF
TABLES...iii
OPERATORS SAFETY SUMMARY...iv
SERVICE SAFETY SUMMARY...v
Section 1 SPECIFICATION
Instalment Description...1-1
Instrument Options...1-1
Standard Accessories 1-1
Performance Conditions...1-1
Safety Certification...1-1
Electrical Characteristics...1-2
Miscellaneous...1-12
Environmental...1-12
Physical Characteristics...1-13
Section 2 OPERATING INSTRUCTIONS
Introduction...2-1
First Time Inspection...2-1
Repackaging for Shipment...2-1
Operating and Non-Operating
Environments...2-1
Preparation For Use...2-1
Rear Interface Considerations... 2-1
Installation and Removal...2-1
Front Panel Operation...2-3
Front Panel Display...2-3
Display...2-3
Front Panel Controls...2-3
Front Panel Connectors...2-3
Front Panel Push Buttons...2-5
Operators Familiarization...2-7
Introduction...2-7
General Operating Characteristics 2-7
Self Test Display...2-7
Input Considerations...2-8
Maximum Safe Input Voltage
Limits...‘2-8
Connecting External and Internal
Signal Sources...2-8
Measurement Considerations...2-8
Input Coupling, Noise, and
Attenuation...2-8
Triggering the Counter 2-9
Reducing Measurment Errors ... 2-9
Measurement Examples...2-11
Frequency A and Period A...2-11
Page
Section 2 OPERATING INSTRUCTIONS (cont)
Ratio B/A...2-11
Width A and Time A - B (Time
Interval)...2-11
Null...2-12
Events B During A...2-12
Time Manual...2-12
Totalize A...2-12
Totalize A+ B...2-13
Totalize A-B...2-13
Risetime A and Falltime A...2-13 Probe Compensation...2-14
Test Function...2-14
Arming (ARM Input)...2-15
WARNING
THE FOLLOWING SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED PERSONNEL ONLY. TO AVOID PERSONAL INJURY, DO NOT
PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN OPERATING
INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
Section 3 THEORY OF OPERATION
Block Diagram Description... 3-1
Detailed Circuit Description... 3-3
Section 4 CALIBRATION
Performance Check Procedure...4-1
Introduction...4-1
Calibration Interval...4-1
Service Available...4-1
Test Equipment Required...4-1
Preliminary Control Settings...4-3
Adjustment Procedure...4-15
CALIBRATION (cont)
Introduction...4-15
Test Equipment Required...4-15
Preliminary Control Settings...4-15
Preparation...4-15
MAINTENANCE
Static-Sensitive Components ... 5-1
Test Equipment...5-1
Circuit Board Removal and
Replacement...5-1
Magnetic Latch Relays...5-3
Cleaning Instructions...5-4
Obtaining Replacement Parts ... 5-4
Ordering Parts...5-4
Soldering Techniques...5-4
Interconnecting Pins...5-5
Square Pin Assemblies...5-5
Bottom Entry and Side Entry
Circuit Board Pin Sockets...5-5
Multipin Connectors...5-5
Rear Interface Connectors...5-7
Introduction...5-7
Functions Available at Right Rear Interface Connector (P1600)____ 5-7
Functions Available at Left Rear Interface Connector
(P1820)---- 5-8
Section 5 MAINTENANCE (cont)
Diagnostics...
Introduction...
Equipment Required...
Adjustment and Test Point
Locations...
Self Test...
TEST Function...
Troubleshooting...
Signature Analysis...
Introduction...
Internal Signature Analysis...
Kernel Signature Analysis...
Selected Components (R1307 and R1326)...
Section 6 OPTONS Option 01 Section 7 REPLACEABLE ELECTRICAL PARTS
Section 8 DIAGRAMS AND ILLUSTRATIONS
Section 9 REPLACEABLE MECHANICAL PARTS