Telecommunications Techniques Corporation - Firebird 1500 - Analyzer
Hersteller:
Kein Bild verfügbar!
Vielleicht können sie für ein
Telecommunications Techniques Corporation Firebird 1500 ?
Ein
Foto hochladen
?
Weitere Anleitungen und Fotos für ein
Telecommunications Techniques Corporation Firebird 1500
können sie
hier hochladen.
Gerät:
Firebird 1500
Datum:
Kategorie:
Gruppe:
Untergruppe:
Informationen
The FIREBERD 1500 is designed to aid in troubleshooting and
evaluating digital communication systems. It generates a
variety of test patterns which are transmitted through the
system. The receiver counts discrepancies between what is
received and what was transmitted. The FIREBERD 1500 has an
independent transmitter and receiver which can be used to
either provide loop-around or end-to-end testing capability.
The FIREBERD 1500 measures bit error rate, bit errors, block
errors, error seconds and total seconds of test at any data
rate between 300 bps and
10 Mbps. Additional measurement features include automatic
polarity detection, automatic synchronization and the
ability to count through error bursts.
These capabilities will be described later in more detail.
All data and clock signals interface with the FIREBERD 1500 via
rugged..plug-in modules which insert through the rear panel.
Each..module meets...-
a different standard interface specification and includes
the standard connector.
Full self-test capability is provided. This feature allows
the entire FIREBERD 1500 and the interface module in use to
be tested without any additional test equipment.
The FIREBERD 1500 provides an RS-232 printer interface and
printer controls as standard equipment. An IEEE 488 printer
interface is also available. This interface can be used to
output directly to a 488-compatible printer. Alternatively,
this interface allows the FIREBERD 1500 to act as an
“addressable talker” in a 488 bus configuration.
A six digit display and a variety of front panel indicators
provide measurement results and the status of the system
under test. Rear panel test
points.allow data from the systemundertest..tobe
furtheranalyzed with an
oscilloscope.
• Test Patterns: Pseudorandom sequences of length 63, 511,
2047, 215-1# and 220-1, Constant mark, constant space..and
alternating mark-space
• Bit Rate: 300 Hz to 10 MHz
e Internal Standard
Clock Frequencies: 1.2, 2.4, 4.8, 9.6, 19.2, and 56 kHz
9 Internal Optional Clock Frequencies
(up to 3): 300 Hz to 10 MHz
• Internal Clock Accuracy (std. or
opt. clocks): 50 PPM accuracy 0 to 50°C (optional : 1 ppm
accuracy at 25°C and 5 ppm stability from 0 to 40" C)
Block Length: TD^,.10^, or 10^ bits
BER Test Length: 105, 106, 107, 108, 109 or 1010 bits
• 8ER Range: 1 to 10 errors/bit
-.3
• Error Insertion: Single error or constant 10 error rate
• LED Indicators: Sync, Sync Lost, Receive Data Invert,
Receive Clock Activity, Transmit Clock Activity, Receive
Data Mark, Receive- Data Space, DSR (DM), CTS (CS), RLSD (RR)
• Input/Output Signals via Interface
Modules: TX Clock Out, TX Clock In, TX Data,
RCV Data, RCV Clock, DSR (DM), CTS (CS), RLSD (RR), RTS
(RS), DTR (TR)
•
Signals.at..Rear.................................................
'.".........................................
Test Points (TTL
Levels): TX Sync, RCV Sync, RCV Data, RCV Clock,
RCV Data Error
• Interfaces: RS-232, V.35, MIL-188C, RS-449■(ftS-423 or
RS-422),
DS1, WECO 303, Lab
• Size: 6” x 12" x 12”
• Weight (approx.): 9 lbs.
• Power: Switch selectable 100/120/220/240 VAC. +10%
50/60 Hz
• Environmental: 0 to 50C operating range
Bedienungsanleitung
Dokumenttyp:
Bedienungsanleitung
Seitenanzahl:
138
Größe:
3,3 MB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
9. Januar 2017
MD5:
4f773a7a-ac91-c015-8798-1b66c4a63f25
Downloads:
290