Trio Electronics - FC-756 - Frequenzzähler
Hersteller:
Bild 1 von 26
Weitere Anleitungen und Fotos für ein
Trio Electronics FC-756
können sie
hier hochladen.
Gerät:
FC-756
Datum:
Kategorie:
Gruppe:
Untergruppe:
Informationen
★ Highly sensitive and dependable frequency counter permits direct readouts of any frequencies of 10 Hz to 60 MHz. The built-in prescaler circuit extends the reading range to 50 MHz ~ 250 MHz in FC-754A and to 50 MHz — 500 MHz in FC-756.
★ Because of the use of zero blanking circuit, all unnecessary 0s are not displayed while signal is present; only the 0 of the last digit is displayed at nosignal time.
★ Input impedance is switchable to 1M ohms or 50 ohms to minimize the effect of impedance on the instrument to be measured.
★ Six-digit indicator with light emitting diodes for utmost ease of readouts. The last digit indicates frequencies in 100 Hz unit while measuring frequencies in MHz unit.
★ Sampling rates during MHz and kHz display are 0.5 sec. and 1.1 sec. respectively, thus frequencies can be easily read.
★ Very accurate measurements of frequencies with adoption of high quality crystals.
★ Light emitting diode flickers to indicate overflow in the counter, eliminating errors in readouts.
1 Handbuch
Reparatur und Bedienungsanleitung
Dokumenttyp:
Reparatur und Bedienungsanleitung
Seitenanzahl:
22
Größe:
12,4 MB
Sprache:
Englisch
Revision:
Dokument-ID:
Datum:
Qualität:
Gescanntes Dokument, teilweise schwer oder teilweise nicht zu lesen.
Upload Datum:
23. April 2021
MD5:
73fbba54-bdb3-cf62-f7df-fa955207aefe
Downloads:
0