ADC Corporation - 6243 - Power Supply
Manufacturer:
Image 1 of 3
If you have any other photos or manuals for the
ADC Corporation 6243
you can
upload the files here.
Equipment:
6243
Date:
2007
Category:
Group:
Sub Group:
Information
The 6243 44 is a DC Voltage Current source Monitor featuring
a wide source and measurement range as
indicated below 6243 Voltage 0 to ±110 V; Current 0 to ±2 A 6244 Voltage 0 to ±20 V; Current 0 to ±10 A
The 6243 44 features high accuracy with a source resolution
of 4-1/2 digits and a measurement resolution of
5-1/2 digits. As well as various types of sweeping functions
and a capacity for measuring pulses with a minimum
width of 1 ms. These features make the product a highly
suitable power source, for characteristic testing
systems testing characteristics and for evaluation in the
research and development fields for
semiconductors and other electronic components.
The features of this product are indicated below.
• Source, measurement range 6243 ±2 A up to ±32 V
±1 A up to ±64 V
±0.5 A up to ±110 V 6244 ±10 A up to ±7 V
±4 A up to ±20 V
See Figure 1-1.
• Voltage Source measurement range 6243 320 mV-110 V 6244 320 mV-20 V
• Current source measurement range 6243 32 μA-2 A 6244 320 μA-10 A
• Voltage digits/measurement digits 6243 Source 4-1/2
digits/Measurement 5-1/2 digits 6244 Source 4-1/2 digits/Measurement 5-1/2 digits
• Voltage Source measurement resolution 6243 Source 10
μV/Measurement 1 μV 6244 Source 10 μV/Measurement 1 μV
• Current source measurement resolution 6243 Source 1
nA/Measurement 100 pA 6244 Source 10 nA/Measurement 1 nA
• Voltage Source current measurement (VSIM) Current source voltage measurement (ISVM)
• Voltage Source voltage measurement (VSVM) Current source current measurement (ISIM)
• Sink-enabled bipolar output
• Minimum pulse width: 1 ms
• Linear, log, random sweep functions for characteristic tests
• Limiter (compliance), oscillation, overload, overheat
detections
• Synchronized operation by integrating 2 or more units of
the 6243 44
• GPIB for integrating an automated measurement system as
standard
1 Manual
User manual
Manual type:
User manual
Pages:
298
Size:
2.8 MB
Language:
english
Revision:
First Printing
Manual-ID:
FOE-8440045E00
Date:
March 2007
Quality:
Electronic document, no scan, very well readable.
Upload date:
Feb. 5, 2017
MD5:
022f355c-d163-2aa0-ee8b-3057b6445115
Uploader:
Mark
Downloads:
2519
Information
This document describes the operations, functions and remote
programming of 6243 44 DC Voltage/Current
Source/Monitor operations.
This document refers the 6243 44 ROM version B00 or later.
(To confirm the ROM version, refer to Section 1.5,
“Operational Check.”)
The following functions are not available for the 6243 44
ROM version A02 or earlier.
• Function for switching the pulse width for external
single-line output
The default is always set to 20 μs.
• TR6143 Mode 2 function
Only the Original Mode and TR6143 Mode 1 functions are
available.
1. Contents of this Manual
This document consists of the following chapters:
Safety Summary Read before using the 6243 44
1. INTRODUCTION Describes the supplied Accessories operating environment, and how to check the 6243 44
correctly.
2. OPERATION Describes the front and rear panel operation.
Basic operation and measurement examples are given.
3. REFERENCE The buttons and keys on the front panel, parameter
groups, parameter items, and functions are explained.
4. PRACTICAL GUIDE FOR MEASUREMENTS
Explains, in detail, functions used to
perform measurements accurately.
5. REMOTE PROGRAMMING Explains the GPIB Interface hardware
connections, the
GPIB setup, and lists GPIB commands and programming
examples.
6. COMPATIBILITY WITH TR6143 Explains the TR6143 compatibility.
7. PERFORMANCE TESTS Explains operations used to confirm
that the 6243 44 is
operating correctly within acceptable limits.
8. CALIBRATION Explains how to calibrate the 6243 44 to ensure
operation within acceptable limits.
9. SPECIFICATIONS Describes the 6243 44s specifications.
A.1 When Problems Occur (Before Requesting
Repairs)
Troubleshooting.
A.2 Error Message List Error messages are explained here.
DIMENSIONAL OUTLINE DRAWING External dimensions: Describes
the external dimensions.