Fluke - 215C - ScopeMeter
Manufacturer:
No picture available!
Maybe you can
upload a pic
for the
Fluke 215C ?
If you have any other manuals for the
Fluke 215C
you can
upload the files here.
.
Equipment:
215C
Date:
2009
Category:
Group:
Sub Group:
Information
The Fluke I92B 196B C7199B-C ScopeMeter test tools have
three input channels that are electrically floating with
respect to each other, and with respect to the power adapter
input.
Channel A and channel B are Oscilloscope channels with a
60/100/200 MHz bandwidth. The Meter/External Trigger channel
is a combined DMM and external trigger channel with a
limited (10 kHz) bandwidth.
The B versions have a black&white LCD, the C versions have a
color display.
1 Manual
Service manual
Manual type:
Service manual
Pages:
86
Size:
2.2 MB
Language:
english
Revision:
revised
Manual-ID:
PN 4822 872 05391
Date:
October 2009
Quality:
Electronic document, no scan, very well readable.
Upload date:
Aug. 5, 2017
MD5:
ec364392-c8e1-c6d0-5dae-ec0fbfc225e6
Downloads:
4532
Last month downloads:
22
Information
1
2
3
4
Title
Page
Safety
Instructions...
1-1
1.1
Introduction...1-3
1.2 Safety
Precautions...1-3
1.3 Caution and Warning
Statements...1-3
1.4 Symbols
...1-3
1.5 Impaired
Safety...1-4
1.6 General Safety
Information...1-4
Characteristics
...
2-1
List of Replaceable Parts
...
3-1
3.1
Introduction...3-3
3.2 How to Obtain
Parts...3-3
3.3 Final Assembly Parts
...3-4
3.4 Main PCA Unit Parts
...3-6
3.5 Accessories 3-8
Performance Verification
...
4-1
4.1
Introduction...4-3
4.2 Equipment Required For Verification
...4-3
4.3 General Instructions
...4-3
4.4 Operating
Instructions...4-4
4.4.1 Resetting the test tool
...4-4
4.4.2 Navigating through menu’s
...4-4
4.4.3 Creating Test Tool
Setup1...4-5
4.5 Display and Backlight
Test...4-5
4.6 Scope Input A&B Tests
...4-7
4.6.1 Input A&B Vertical Accuracy Test
...4-7
4.6.2 Input A&B DC Voltage Accuracy
Test...4-9
4.6.3 Input A&B AC Voltage Accuracy Test (LF)
...4-11
4.6.4 Input A & B AC Coupled Lower Frequency
Test...4-12
4.6.5 Input A and B Peak Measurements
Test...4-13
4.6.6 Input A&B Frequency Measurement Accuracy Test
...4-14
4.6.7 Input A&B Phase Measurements
Test...4-15
4.6.8 Time Base Test
...4-16
4.6.9 Input A Trigger Sensitivity
Test...4-17
4.6.10 Input A AC Voltage Accuracy (HF) & Bandwidth Test
...4-19
4.6.11 Input B Trigger Sensitivity Test
...4-20
4.6.12 Input B AC Voltage Accuracy (HF) & Bandwidth Test
...4-21
4.6.13 Video test using the Video Pattern Generator 4-22
4.6.14 Video test using SC600 Scope Calibration Option
...4-24
4.7 External Trigger Level Test
...4-27
4.8 Meter (DMM)
Tests...4-28
4.8.1 Meter DC Voltage Accuracy Test
...4-28
4.8.2 Meter AC Voltage Accuracy & Frequency Response Test
...4-29
4.8.3 Continuity Function
Test...4-30
4.8.4 Diode Test Function Test
...4-30
4.8.5 Ohms Measurements
Test...4-30
4.9 Probe Calibration Generator Test
...4-32
5
Calibration Adjustment
...
5-1
5.1
General...5-3
5.1.1 Introduction
...5-3
5.1.2 Calibration number and
date...5-3
5.1.3 General
Instructions...5-3
5.1.4 Equipment Required For Calibration
...5-4
5.2 Calibration Procedure
Steps...5-4
5.3 Starting the Calibration
...5-4
5.4 Contrast Calibration Adjustment
...5-6
5.5 Warming Up &
Pre-Calibration...5-7
5.6 Final Calibration
...5-8
5.6.1 Input A LF-HF Gain
...5-8
5.6.2 Input B LF-HF Gain
...5-9
5.6.3 Input A&B LF-HF Gain
...5-11
5.6.4 Input A&B Position
...5-12
5.6.5 Input A&B Volt Gain
...5-13
5.6.6 DMM Volt Gain
...5-14
5.6.7 Input A& B, and DMM
Zero...5-15
5.6.8 DMM Ohm Gain
...5-16
5.6.9 Calculate
Gain...5-17
5.7 Save Calibration Data and
Exit...5-17
5.8 Probe Calibration
...5-19
6
Disassembling the Test
Tool...
6-1
6.1.
Introduction...6-3
6.2. Disassembly & Reassembly Procedures
...6-3
6.2.1 Required Tools
...6-3
6.2.2 Removing the Tilt Stand & Hang
Strap...6-3
6.2.3 Replacing the Side-Strap, Changing the Side-Strap
Position...6-3
6.2.4 Opening the Test Tool, Removing the
Battery...6-3
6.2.5 Removing the Main PCA Unit and the
Fan...6-5
6.2.6 Removing the Display Assembly
...6-6
6.2.7 Replacing the LCD Window/Decal
...6-7
6.2.8 Removing the Keypad and Keypad
Foil...6-7
6.2.9 Disassembling the Main PCA
Unit...6-7
6.2.10 Reassembling the Main PCA
Unit...6-8
6.2.11 Reassembling the Test Tool
...6-9