.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?


Fluke - PM 6306 - LCR Meter
Manufacturer:
Equipment:
PM 6306
Date:
1996
Category:
Group:
Sub Group:

Information

The PM6306 Programmable Automatic RCL Meter is used for precise measurements of resistance, capacitance, and inductance. Its basic accuracy is 0.1 %. The instrument provides an autofunction and autoranging feature. It allows fast and high precision measurements and diagnostic of passive components over a wide range. The component to be measured is connected to the instrument via front panel test posts, the PM 9541A four-wire test cable, or the PM 9542A four-terminal test adapter. The Adapter PM 9542SMD or the PM 9540/TWE SMD Tweezers for surface-mounted components are also available. Measurements are performed using a four-wire system. The test frequency is selectable in the range from 50 Hz to 1 MHz. The test voltage is selectable from 50 mV to 2 V rms. The measurement result, the numerical value, dimension, and the equivalent circuit symbol, are all displayed on the large five-digit liquid-crystal display (LCD), which is updated at a rate of approximately two measurements per second. A microprocessor controls the measurement process, computes the measurement value, and transfers the result to the display. In the AUTO mode the dominant and the secondary parameter, either R, C, or L of the component under test is automatically selected for display. For example, for an inductance with a quality factor Q between 1 and 1000, the instrument indicates the measurement value of the series inductance and the series resistance and as the equivalent-circuit symbol, the series connection of an inductance and a resistance. In addition to AUTO mode, the following modes can be selected: ■ Series respectively parallel components - Impedance Z ■ Phase angle <I> ■ Quality factor Q, dissipation factor D ■ Component voltage Vx, component current lx

show more

2 Manuals

User manual
Manual type:
User manual
Pages:
220
Size:
7.6 MB
Language:
english
Revision:
2
Manual-ID:
4822 872 10141
Date:
Quality:
Scanned document, all readable.
Upload date:
Nov. 17, 2013
MD5:
4af98ced-7641-78cb-e938-f7fcf5a5baa4
Downloads:
3156
Datasheet
Manual type:
Datasheet
Pages:
5
Size:
81.4 KB
Language:
english
Revision:
Manual-ID:
Date:
1998
Quality:
Electronic document, no scan, very well readable.
Upload date:
Jan. 21, 2023
MD5:
b17e53de-4eb3-f354-7d14-e8a3e6897cdd
Downloads:
519