Megger - BM7-250 - Analog multimeter
Manufacturer:
Image 1 of 2
If you have any other photos or manuals for the
Megger BM7-250
you can
upload the files here.
Equipment:
BM7-250
Date:
Category:
Group:
Sub Group:
Information
This instrument is designed to be suitable for use by
electrical installation contractors and as such is a robust
meter having a stabilized power supply, thus requiring no
zero adjustment, etc. after initial calibration by the
Manufacturer. However, it is inevitable that normal wear and
tear will eventually cause the performance of the instrument
to deteriorate.
BM7 Battery MEGGER testers use an electronically generated
test voltage, which is energised only while TEST button is
pressed. One hand operation. Automatic discharge of circuit
capacitance. On-load battery check. Taut-band, moving coil
movement.
1 Manual
Service manual
Manual type:
Service manual
Pages:
26
Size:
1.9 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
April 22, 2014
MD5:
bfe66bd6-af15-6c74-bd88-dfc51ed8b951
Downloads:
1658
Information
- London Instrument Repair Centre
1. Introduction
2. Repair requirements
3. Fault location
4. Fault diagnosis and repair
5. Preliminary re-assembly
6. Re-calibration
7. Final re-assembly
8. Circuits and Components
This manual covers both BM7 models. Their comparative
specifications are given for identification purposes.
This manual has been produced as an aid to the trained
Technician who undertakes the servicing of these
instruments. The design of the instrument is such that a
minimum of equipment is required and components are easily
accessible.
If the customer has not advised that the repair may be
undertaken irrespective of your charges, we strongly
recommend that the instrument should be examined and an
estimate submitted before any work is undertaken. This
procedure, and the acceptance of the estimate, will provide
a safeguard against disputes arising over a charge for the
work after the necessary repairs have been completed.