Recognizing the need for a stable, low cost generator that produces all necessary patterns for accurate convergence and trouble shooting in the home, SENCORE has developed the CG126 Standard Color Bar Generator. The CG126 is the smallest, lightest, and least expensive generator of any on the market and yet it provides the same stable patterns of generators costing twice as much. The CG126 provides the following patterns: Ten Standard Color Bars: The type and phase that is fast becoming the standard of the industry. Crystal controlled keyed bars (RCA type with 30 degrees phase change between each) as explained in most service literature, offer a complete gamut of colors for every color circuit test. Adjustable Size White Dots: New stabilized dots, a must for convergence, are created by new SENCORE counting circuits. The size of the dots are adjustable from the rear of the unit. Crosshatch Pattern: A basic requirement for fast CRT convergence, and, also, for sweep linearity and "overscan" adjustments. Vertical and Horizontal Bars: An added feature to speed up convergence, not found on many other color generators. SPECIFICATIONS RF Output: Frequency is factory set to Channel 4. It can easily be changed to Channel 3 or Channel 5, if Channel 4 is used in your area. Modulation: Any one of five patterns: Color Bars, Dots, Crosshatch, Vertical Bars, or Horizontal Bars. Tube Complement: 6-12AU7A, 2-12AZ7, 1-12BE6 Diode Complement: 2-1N295 Crystal Complement: 1-189KC t .005% for timer, 1-3563.795KC ί .001% for color Lars. Power Consumption: 35 watts at 117 VAC line. Size: 11 inches wide by 8 inches high by 6 inches deep. Net Weight: 9 1/2 pounds.