Tektronix - 115 - Generator
Manufacturer:

Image 1 of 2
If you have any other photos or manuals for the
Tektronix 115
you can
upload the files here.
Equipment:
115
Date:
1968
Category:
Group:
Sub Group:
Information
General
The Type 115 Pulse Generator is a multi-purpose instrument
which generates pulses with a variety of controllable
characteristics. It has a maximum repetition rate of 10 MHz,
a maximum amplitude of ±10 volts and a minimum risetime and
falltime of 10 ns. Those pulse characteristics which are
controllable are: the repetition rate, width, amplitude,
risetime, falltime, DC offset and polarity. Its five modes
of operation include on undelayed pulse, a delayed pulse
(with a calibrated delay), paired pulses, an externally
triggered burst of pulses and an externally gated burst of
pulses. In addition to the output pulse, there is an
undelayed and a delayed trigger output.
The following specifications are valid for instruments
operated at an ambient temperature of from 0°C to +50°C
after an initial warm-up period of 20 minutes, when
previously calibrated at a temperature of +25°C ±5°C.
Section 5, Performance Check and Calibration Procedure,
gives a procedure for checking and adjusting the Type 115
with respect to the following specification.
Type 115 Mod 146B
This manual also pertains to the Type 115 Mod 146B. The Type
115 Mod 146B is identical to the standard Type 115 except
that it is shipped without o cabinet and with a coiled,
detachob'e power cord (Tektronix Part No. 161-0031-00) and
power cord connector receptical (Tektronix Port No.
331-0102-00). See Section 9 for rackmounting instructions.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
137
Size:
22.3 MB
Language:
english
Revision:
Manual-ID:
070-0786-00
Date:
January 1968
Quality:
Scanned document, all readable.
Upload date:
April 23, 2017
MD5:
452bb166-06b2-f4e6-b23e-cdd8b7e856cc
Downloads:
841