Keithley - 7063 - Interface
Manufacturer:
Equipment:
7063
Date:
1984
Category:
Group:
Sub Group:
Information
The Model
7063 is an RF scanner card that switches RF
signals (up to 500MHz) from one channel to another. All
channels switched are terminated into 50tl when not
selected. When a channel is closed, the RF signal is routed
from the input to the output. The Model
7063 works in
conjunction with a scanner mainframe such as the Keithley
Model 705 or Model 706.
The Model
7063 incorporates two 1X5, switches on each card.
Each switch has a separate common (ground). This allows two
signals to be switched at the same time. One 1X5 switch
could be cascaded with the other 1X5 switch (on the same
card) for a 1 X 10 switch configuration. Thus, the Model
7063 is configurable for several different switch
configurations.
Specified relay life is greater than 100,000 closures.
Cables are routed from the rear of the card. The front plugs
into the mainframe (e.g. Model 705 or Model 706). The
mainframe must be in the matrix mode or 2-pole mode to
operate the channels on the Model
7063 card. BNC connectors
allow easy connections to input/output signal paths.
Service and user manual
Manual type:
Service and user manual
Pages:
30
Size:
742.7 KB
Language:
english
Revision:
A
Manual-ID:
7063-901-01
Date:
Quality:
Scanned document, all readable.
Upload date:
March 2, 2014
MD5:
674717cc-b8a6-46a7-9f72-58f6045355fc
Downloads:
644