•Two Serial digital input systems The SDI input connector on the LV 5750 supports free rates.Thus, either HD-SDI or SD-SDI signals can be applied to the same connector. You can select auto or manual setting for the input signal format. • SDI Output Equipped with an active output connector that reclock the input signal. • Display Employs a color TFT LCD monitor with XGA resolution (1,024 x 768). The LCD monitor can show various displays such as waveform display, vectorscope display, picture display, audio display, and status display. These displays can also be placed side by side on a single screen (multi display). • Waveform display Displays waveforms of serial digital signals side by side or overlaid. The amplitude can be set to variable or expanded up to 5 times. The time axis can be expanded 10, 20 or 40 times. Enables level measurements and time measurements using cursors;. In addition, a composite signal conversion function that artificially converts component signals into composite signals such as NTSC or PAL is; provided. This function allows the level of component signals to be managed in a similar fashion as conventional analog signals. • Vectorscope function Displays chrominance difference signal in vector format. The amplitude can be set to variable, IQ-MAG, or expanded up to 5 times. You ;an turn on/off the IQ axis display, which is convenient for monitoring signals. • Picture display Displays SDI signals on a simple color picture display. • Line selector Enables the selection and display of arbitrary video signal lines. Can be used on the waveform display, vector scope display, picture display, and data dump display. • Embedded audio signal display function Separates the embedded audio signal from the serial digital signal and shows lissajous display, sound image, and level meter display. Level display shows eight channels, and the range and response can be changed. * The audio quantization precision of SD-SDI is 20 bits. • Screen capture Enables the displayed screen to be captured to the internaI memory or compact flash memory card. The BMP data of the screen image can be retrieved into a PC via the network using *2 FTP. When the internal memory or *'compact flash memory card is used, the captured screen and the signals that are input sequentially can be superimposed on the screen. • Extensive Analysis Functions • Various types of error detection Detects *3CRC errors, *3EDH errors, *3BCH errors, checksum errors. Error detection is useful in the monitoring of SDI signals. • Event log function of SDI signals Logs detected errors and events and stores the log list to the *1 compact flash memory card. The log can be retrieved as text data into a PC via the network using *2FTP. • Digital data dump function The digital data after parallel conversion can be displayed in hexadecimal or binary notation. This is useful when problems occur or when analysing various types of data. The data dump can be stored to a *1 compact flash memory card. The data dump can be retrieved as text data into a PC via the network using *2 FTP. • Analysis display Analyzes and displays voice control packets embedded in the SDI signal, the channels status, EDH packets, and other packets in the AES/EBU signal. • Operation • Remote control The LV 5750 can be controlled through the panel and remotely controlled through a computer via the *2 Ethernet network. In addition, presets can be recalled using the *4 remote connector on the rear panel. • Pres et function Stores up to 30 sets of frequently used panel settings. You can easily recall stored settings from the panel, Ethernet network connector or remote connector. • External Synchronization Allow:; tri-level sync signals or B. B signals of NTSC and PAL to be input. • Ilium nation of all key LEDs You can turn on all the key LEDs. This is useful when operating the LV 5750 in a very dark place. • Power supply A V-n ount battery adapter is available on the rear panel of the LV 5750 which enables the use of batteries used on video cameras and other equipment. An XLR DC input connector is also available for operation on a 12-VDC power supply. •Tripod attachment A screw hole for attaching a camera tripod is provided on the bottom panel of the LV 5750. The LV 5750 can be mounted on a tripod. • Dedicated rack mount adapter (sold separately) By using the dedicated rack mount adapter that is sold separately, the LV 5750 can be rack mounted on a rack with short depth. To rack mount the LV 5750, remove the outer case and use the dedicated rack moun t adapter. *1 A compact flash memory card unit that comes standard is required. In this case, the Ethernet Unit and the Remote Control Unit that are sold separately cannot be used. *2 An Ethernet Unit sold separately is required. In this case, the compact flash memory card unit that comes standard and 1 he Remote Control Unit that is sold separately cannot be used. *3 CRC error and BCH error detection is used for HD-SDI; EDH error detection is used for SD-SDI. *4 A Remote Control Unit sold separately is required. In this case, the compact flash memory card unit that comes standard and I he Ethernet Unit that is sold separately cannot be used.