WRL Electronics Globe V-10 Other
Manufacturer:
If you have any other photos or manuals for the
WRL Electronics Globe V-10
you can
upload
the files here
.
Model:
Globe V-10
Date:
1961
Class:
Type:
SubType:
VFO Variable Frequency Oscillator
Information
INTRODUCTION
The V-10 consists basically of a seven band, electrically,
mechanically and thermally stable variable frequency
Oscillator to be used in conjunction with CW, AM, or SSB
transmitters. It provides a stable output for 160, 80, 40,
20, 15, 10, and 6 meters, covering all portions oi each band.
2. DESIGN
Considerable time and effort were spent in the engineering
of the V-10 to accomplish the most favorable arrangements of
electrical, mechanical, and thermal designs.
A modified Clapp
Oscillator was chosen because of the series
tuned arrangement of the frequency determining circuits, in
which case small changes in input capacity of the tube will
have little or no effect on frequency. By using electron
coupling, frequency variations, due to output loading, were
minimized.
All frequency determining components have been completely
enclosed in a separate compartment to isolate them from
drafts and sudden changes in temperature. The remotely
controlled band switch was also enclosed in this compartment
to provide short leads to the components it controls.
A sturdy, two section variable capacitor was used to provide
maximum band spread and stability on all bands.
Temperature compensation was used liberally to reduce
frequency drift during and after warm-up.
A cathode follower stage proceeding the
Oscillator, isolates
the
Oscillator from the buffer
Amplifier, while the
broadband buffer
Amplifier provides amplification and also
isolation from the
Transmitter.
Voltage regulation is used in all voltage sensitive
circuits. The unit contains its own
Power Supply, thereby
enabling it to be used with all types of equipment.
Manual type:
Service and User Manual
Pages:
19
Size:
1.41 Mbytes (1478589 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
unknown
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2014 07 06
MD5:
531464dd0556bf00ef7acad749152f02
Downloads:
476
Information
VORWARD. . . ... 2
I. DESCRIPTION ... 3
1. Introduction ... 3
2. Design ... 3
3. Equipment Complement ... 4
4. Equipment Specifications ... 4
II. INSTALLATION AND OPERATION ... 5
1. Preliminary ... 5
2. Pre-operational Check ... 5
A. Description of Controls ... . 5
B. External Connections ... . . 5
3. Installation ... 7
4. Operation ... 8
III. MAINTENANCE ... 9
1. Forward ... 9
2. Alignment. ... 9
3. Service Aids
A. Parts Identification Top ... 12
B. Parts Identification Bottom ... 13
C. Dial Stringing Drawing ... 14
D. Parts List Schematic, Volume Chart ... 15
E. Service Stations and Distributors ... ' . Inside
Back Cover
F. Warranty ... Back Cover
Comments