Yaesu - FT-101-B - Transceiver
Manufacturer:
Image 1 of 3
If you have any other photos or manuals for the
Yaesu FT-101-B
you can
upload the files here.
Equipment:
FT-101-B
Date:
Category:
Group:
Sub Group:
Information
The model FT-I01B/277B SSB Transceiver is a precision
built, compact high performance transceiver of advanced
design providing SSB (USB, LSB selectable), CW and AM modes
of operation. The transceiver operates at an input of 260
watts SSB, 180 watts CW and 80 watts AM on all bands 160 to
10 meters.
All circuits, except the transmitter driver and linear
amplifier, are transistorized and composed of standard
computer type plug-in modules, permiting easy maintenance.
The transceiver is self-contained, requiring only an antenna
and an A.C. mains for home, portable or mobile operation.
The transceiver may be operated from 100/110/
117/200/220/234 volts AC when appropriately wired but is
normally supplied for 117 volt AC and 12 volt DC operation.
The two-way solid state power supply is an integral part of
the unit. Two power cords are provided with the transceiver.
Selection of AC or DC power source is automatically made
when the proper line cord plug is inserted.
For mobile operation a separate switch is provided on the
front panel to turn off the tube heaters while in
the receive mode. In this mode the transceiver draws only
0.5 amp. less than your auto dash lights.
All accessories, such as VOX, break-in CW with side-tone, 25
and 100 KHz calibrators, noise blanker, 10 MHz WWV are
built-in. In addition , dual VFO adaptor, crystal control
adaptor, speaker and clarifier are integral parts of the
unit. Provision is made for the installation of 600 Hz
crystal filter for the expert CW* DX operator. The CW filter
is selected automatically when the transceiver mode switch
is placed in the CW position.
The entire transceiver weighs approximately 30 pounds, is 13
1/2” wide, 6” high, 11 1/2” deep. Construction is of
heavy-gauge steel which provides an extremely rugged
package, virtually immune to the effects of vibration and shock.
The SP 101P/277P. combination phone patch and external
speaker, is a valuable optional accessory for base
operation. The.unit features an elliptical type speaker for
high quality voice reproduction. Other optional equipment
includes the FV-101B/277B external VFO and mobile
mounting brackets.
2 Manuals
Service manual
Manual type:
Service manual
Pages:
234
Size:
70.3 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
July 26, 2014
MD5:
7037a3ef-4b12-d6aa-5457-da16f2cc5f56
Downloads:
3914
Service and user manual
Manual type:
Service and user manual
Pages:
43
Size:
6.4 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
March 3, 2023
MD5:
45aeaa76-c5e0-5018-1192-d1d7ff389448
Downloads:
0