Wavetek - SSI-3000B - Test Set
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Wavetek SSI-3000B
you can
upload the files here.
Equipment:
SSI-3000B
Date:
1983
Category:
Group:
Sub Group:
Information
The Wavetek Model SSI-3000B is a compact, lightweight
Service Monitor for testing FM and AM transceivers. Its low
(25 lb) weight and optional inverter permit use in the
field, powered by a vehicle battery.
The frequency range is 400 kHz to 1000 MHz in 100 Hz steps.
An audio synthesizer permits generation of subaudible tones
and timed tone bursts. In receive mode, an internal counter
displays frequency error, modulation frequency, or received
sub-audible tone frequency. RF voltage level Is continuously
variable from 0.03 μΝ/RMS to 316 mVRMS.
An internal CRT display shows modulation waveform and
relative signal strength. A meter reads modulation, SINAD
(using the internal 1 kHz tone source), audio input voltage,
or RF power from 1 to 100 W. The internal load eliminates
the possibility of damage from accidental keying.
The meter and CRT both display the same information,
including SINAD, noise and distortion; however, only the
meter indicates power, and only the CRT indicates relative
signal strength.
1 Manual
Service and user manual
Manual type:
Service and user manual
Pages:
134
Size:
11.5 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, all readable.
Upload date:
Nov. 18, 2014
MD5:
d4132260-8712-7564-daa4-0b059341867e
Downloads:
1371