RMS Power output (40 Hz – 20 kHz simultaneous drive of both channels) 8 Ω load...............................................................40 W x 2 6 Ω load [F]..........................................................47 W x 2 4 Ω load...............................................................55 W x 2 DIN Power output (40 Hz – 20 kHz simultaneous drive of both channels) 8 Ω load...............................................................45 W x 2 4 Ω load...............................................................60 W x 2 IHF Dynamic Power (1 kHz simultaneous drive of both channels) 8Ω load................................................................55 W x 2 6 Ω load [F]..........................................................67 W x 2 4Ω load................................................................80 W x 2 Total harmonic distortion (40 Hz – 20 kHz simultaneous drive of both channels, 8 Ω load) ..........................................................................0.01 % Output band width (8 Ω load, 0.06 %) ............................................................ 10 Hz – 30 kHz Frequency response (CD, 1 W, 8 Ω load) 10 Hz – 50 kHz.........................................+0 dB, -1 dB Dumping factor (8 Ω load, 40 Hz – 20 kHz).......................100 Input sensitivity/Input impedance PHONO (MM)..............................................2.2 mV/47 kΩ CD, LINE, TUNER, AUX/DVD, RECORDER ..............................................................200 mV/20 kΩ Maximum allowable PHONO input level (1 kHz) MM........................................................................ 110 mV RIAA deviation (40 Hz – 20 kHz).......................... ±0.5 dB S/N (IHF-A, 1 W, 8 Ω load) PHONO (MM) : 5 mV input...................................... 83 dB CD, LINE, TUNER, AUX/DVD, RECORDER : 500 mV input.................................................... 100 dB Tone control Bass (100 Hz)........................................................ ±10 dB Treble (10 kHz)....................................................... ±10 dB 1. TECHNICAL SPECIFICATIONS DIMENSIONS (unit : mm) Power requirement [F] ......................................................AC 100 V, 50/60 Hz [N] ......................................................AC 230 V, 50/60 Hz [U] ...........................................................AC 120 V, 60 Hz Power consumption EN60065/J60065.....................................................110 W 4Ω, 55W x 2 output..................................................250 W Standby power consumption [F].....................................0.4 W Accessories Remote controller (RC003PM)........................................1 AAA batteries...................................................................2 Detachable AC power cable.............................................1 Maximum outer dimensions (Amplifier) Width.....................................................................440 mm Height ...............................................................104.5 mm Depth.................................................................369.5 mm Weight (Amplifier).................................................... 6.7 kg