Amplifier Research - 5S1G4 - Amplifier
Manufacturer:
No picture available!
Maybe you can
upload a pic
for the
Amplifier Research 5S1G4 ?
If you have any other manuals for the
Amplifier Research 5S1G4
you can
upload the files here.
.
Equipment:
5S1G4
Date:
Category:
Group:
Sub Group:
Information
The Model
5S1G4 is a solid state, self-contained,
air-cooled, broadband amplifier designed for applications
where instantaneous bandwidth and high gain are required.
Housed in a stylish contemporary cabinet, the
unit is designed for benchtop use, but can be removed from
the cabinet for immediate equipment rack
mounting. The 5S1G4, when used with a sweep generator, will
provide a minimum of 5 watts of RF power.
Included is a front panel gain control which permits the
operator to conveniently set the desired output level.
The
5S1G4 is protected from RF input overdrive by an RF
input leveling circuit which controls the RF input level
to the RF amplifier first stage when the RF input level is
increased above 0 dBm. The RF
Amplifier stages are
protected from over temperature by removing the DC voltage
to them if an over temperature condition occurs
due to cooling blockage or fan failure. There is a fault
lamp on the rear panel to indicate an over temperature
or power supply fault condition. The unit can be returned to
operate when the condition has been cleared.
Service and user manual
Manual type:
Service and user manual
Pages:
136
Size:
2.5 MB
Language:
english
Revision:
Manual-ID:
1007385-501_
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Sept. 10, 2016
MD5:
d3e01f33-a814-6b23-3787-dcab10aa42ca
Downloads:
369