Radiosystem - RS 9694 - Communications Service Monitor
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Radiosystem RS 9694
you can
upload the files here.
Equipment:
RS 9694
Date:
1986
Category:
Group:
Sub Group:
Information
The main purpose of the measuring coupler is to provide the
reflection alarm unit with rectified signal of the output
power to the antenna and reflected power. Two coupled
signals are also made available for testing with, for
example, a spectrum analyser.
The input is to connector J2, the output from connector J1.
The samples are obtained via four directional couplers. The
rectified signal are available at two levels via connector
J5. The other samples are available from separate
connectors, J3 and J4.
Typical value:
Middle frequency 465 MHz
Forward Po = 30 W Uo = 0,427V
Backward Pr = 3.0 W Uo = 0,477V
Refl. fact. 20
J3 and J4 -40dB
1 Manual
Service manual
Manual type:
Service manual
Pages:
10
Size:
4.3 MB
Language:
english
Revision:
Manual-ID:
Date:
January 1986
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Oct. 4, 2016
MD5:
2d6e238f-4b9b-3f69-f8f2-b24f94688169
Downloads:
500