BK Precision 5105B Oscilloscope
Manufacturer:
No picture available!
Maybe you can
upload
a pic for the
BK Precision 5105B ?
If you have any other manuals for the
BK Precision 5105B you can
upload
the files here.
Model:
5105B
Date:
2005
Class:
Type:
SubType:
150 MHz (1G/s) Analog/Digital Oscilloscope
Information
150MHz (1GS/s) Analog/ Digital
Oscilloscope
The model
5105B is a 150 MHz (1GS/s) Analog/Digital Storage
Oscilloscope. It is a
high performance 150MHz analog
Oscilloscope with the
capability to digitize and store
waveforms with its 1GS/s A/D Converters. After the digital
acquisition the data can be
manipulated and displayed for examination.
The digital capabilities offer the ability for one shot
events, you can see what happened
before the trigger. After acquisition, the data can be
manipulated and displayed in many
different ways. You can change time base or vertical
position. You can select which por-
tion of a waveform you'd like to look at in more depth. You
can compare the measured
waveform to a "known good" waveform in memory.
■ 1GS/s Real time sampling
■ Auto set
■ Save/recall
■ Readout cursors
■ Time base 50s to 5ns
■ 8-Bit low noise flash A/D converters
■ Pre and post trigger – 100% to +400%
■ Acquisition modes: Single Event, Refresh, Average,
Envelope, Roll, Peak-Detect
■ RS-232
Interface
Manual type:
User Manual
Pages:
46
Size:
1.77 Mbytes (1850845 Bytes)
Language:
english
Revision:
Manual-ID:
481-548-9-001
Date:
2005 01 01
Quality:
Scanned document, all readable.
Upload date:
2017 01 25
MD5:
52f63918bad337fea33146b1c2fccad1
Downloads:
458
Information
Specifications Important hints
List of symbols used:
Positioning the instrument Safety
Proper operation CAT I
Environment of use.
Environmental conditions
Maintenance
Line voltage
Description of the controls Basic signal measurement
Signals which can be measured
Amplitude of signals
Values of a sine wave signal
DC and AC components of an input signal
Timing relationships
Connection of signals
First time operation and initial adjustments
Trace rotation TR
Probe adjustment and use
1 kHz adjustment
1 MHz adjustment
Operating modes of the vertical
Amplifier
XY operation
Phase measurements with Lissajous figures Measurement of
phase differences in dual channel Yt mode Measurement of
amplitude modulation
Triggering and time base
Automatic peak triggering (MODE menu) Normal trigger mode
(See menu MODE)
Slope selection (Menu FILTER)
Trigger coupling (Menu: FILTER)
Video (tv triggering)
Frame sync pulse triggering Line sync pulse triggering LINE
trigger Alternate trigger External triggering
Indication of triggered operation (TRIG'D LED) Hold-off time
adjustment Time base B (2nd time base). Delaying, Delayed
Sweep. Analog mode.
Alternate sweep
4 AUTOSET 19
5 Component tester 19
6 CombiScope 21
6 DSO Operation 22
6 DSO operating modes 22
6 Memory resolution 22
6 Memory depth 23
6 Horizontal resolution with X magnifier 23
6 Maximum signal frequency in DSO mode 23
7 Display of aliases 23
7 Vertical
Amplifier operating modes 23
7
Data transfer 23
8 RS-232
Interface, Remote control 24 Selection of Baud rate 24
10 Data transmission 24 10
10 General information concerning MENU 25
10
11 Controls and Readout 26
Manual type:
Datasheet
Pages:
1
Size:
262.71 Kbytes (269011 Bytes)
Language:
english
Revision:
Manual-ID:
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2017 09 20
MD5:
d5dcfa4e49ec39d54eab751651fb1635
Downloads:
378
Comments