.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....
lost-manuals.com

Equipment information:

Analyzer -- Quadtech Inc. Guardian 5000

Manufacturer:
Quadtech Inc.
Model: Guardian 5000
Date: 1999
Category: Measurement instruments
Group: Analyzer
Description: Safety Analyzer
Information:
The Guardian 5000 Safety Analyzer combines four critical
safety tests into a single
instrument, these being AC hipot, DC hipot, insulation
resistance measurements and
ground continuity test. The hipot test can be programmed
over a voltage range of 0.1 to
5KV AC and 0.5 to 6KV DC with a min/max leakage current
detection range of 300μA to
40mA AC and 20mA DC. Insulation resistance measurements are
possible to 10GΩ at
programmable DC test voltages between 100 and 1000V. A
ground continuity test to 30A
AC is also possible. The instrument comes standard with
internal storage of up to 50 memory
groups and an IEEE-488.2 interface for remote control
operation and communication with
other instrumentation.







These manuals for the QuadTech Guardian 5000 Analyzer
can you download here for free:

User Manual -- Quadtech Inc. -- Guardian 5000

Manual Type: User Manual QuadTech-8628-Manual-Page-1-Picture
Pages: 62
Size: 305.94 Kbytes (313280 Bytes)
Language: english
Revision:
Manual-ID/Number: 150206/B3
Date: 01 November 1999
Quality: Electronic document, no scan, very well readable.
Upload date:
Downloads: 42 since 29 January 2017
Information:
Warranty
...........................................................................................................v
Specifications
...........................................................................................................vii
Introduction - Section 1
1.1 Unpacking and Inspection
.............................................................................1-1
1.1 Product
Overview..........................................................................................1-1
1.3 Front Panel
Description.................................................................................1-2
1.4 Rear Panel Description
..................................................................................1-6
1.5 Accessories Included
.....................................................................................1-7
1.6 Accessories/Options
Available......................................................................1-7
1.7 Power
Requirements......................................................................................1-8
Operation - Section 2
2.1 Startup
...........................................................................................................2-1
2.2 Instrument Zeroing/Offset
.............................................................................2-1
2.3 Connection to Device Under Test
.................................................................2-3
2.4 Measurement Procedure
................................................................................2-6
2.5 Programming Test Modes
.............................................................................2-8
2.6 Programming Hipot Test
...............................................................................2-10
2.7 Programming Insulation Resistance (IR) Test
..............................................2-12
2.8 Programming Ground Continuity
Test..........................................................2-14
2.9 Initial Parameter
Setting................................................................................2-16
2.10 Front Panel Lockout
......................................................................................2-18
2.11 Software Version
Display..............................................................................2-18
2.12 Clear Setup
Memory......................................................................................2-18
Input/Output Interfaces - Section 3
3.1
Remote...........................................................................................................3-1
3.2 IEEE-488
Interface........................................................................................3-3
3.2.1 Description
........................................................................................3-3
3.2.2 Interface
Commands..........................................................................3-4
3.2.2.1 Listener Functions
..............................................................3-5
3.3.2.2 Talker
Functions....................................................................3-9
3.2.3 Sample QuickBASIC
Program..........................................................3-11
3.3 Scanner Interface
...........................................................................................3-14
3.3.1 Scanner Accessories
..........................................................................3-14
3.3.2 Scanner Card Installation
..................................................................3-14
3.3.3 Scanner Connections
.........................................................................3-15
3.3.4 Scanner Programming
.......................................................................3-17
3.4 G16 International Power
Strip.......................................................................3-19
4.1 General
..........................................................................................................4-1
4.2 Instrument
Return..........................................................................................4-1
4.3 Calibration
.....................................................................................................4-1
4.3.1 Calibration
Procedure........................................................................4-2
4.3.2 AC Voltage
Calibration.....................................................................4-3
4.3.3 DC Voltage
Calibration.....................................................................4-4
4.3.4 IR Voltage Calibration
......................................................................4-4
4.3.5 AC Current Calibration
.....................................................................4-5
4.3.6 DC Current Calibration
.....................................................................4-6
4.3.7 GC
Calibration...................................................................................4-7
4.3.8 Finalize Calibration
...........................................................................4-8
Start Free Download




Comments (0)

No comments yet. Be the first!

Add Comment

* Required information
1000
Captcha Image
Powered by Commentics

Interesting manuals



Tektronix
TM506

 Tektronix TM506

Norlin
Fuzztain MFZT-272A

 Norlin Fuzztain MFZT-272A

Sony
TA-N55ES

 Sony TA-N55ES

These manuals are for personal use only.

These documentations are only intended for qualified technicians who are aware of the respective safety regulations.

Trademarks and Copyrights used herein are the property of their respective owners.