The PM 3580/PM 3585 family of logic analyzers are State and Timing Logic Analyzers for use within the R & D, Manufacturing, Service and Education environments. They are available in 32/64/96 channel models. The operating speed of the PM 3580 is 100 MHz and the operating speed of the PM 3585 is 200 MHz. The PM 3580 and the PM 3585 each come in two basic models, these are: PM 3580/30 32 dual analysis channels with 100 MHz Timing, 50 MHz state and 1K deep acquisition memory. PM 3580/60 64 dual analysis channels with 100 MHz Timing, 50 MHz state and 1K deep acquisition memory. PM 3585/60 64 dual analysis channels with 200 MHz Timing, 50 MHz state and 2K deep acquisition memory. PM 3585/90 96 dual analysis channels with 200 MHz Timing, 50 MHz state and 2K deep acquisition memory. All of the above models have the following standard features: Human interface of an integral keypad and rotary knob, and a nine inch white phosphor, high resolution CRT. 3.5 inch micro floppy disc drive for setup, storage and retrieval of data. Rear mounted BNC connections for input and output of trigger signals. External video port. Centronics printer interface. RS-232-C ports for other peripherals to be connected, e.g. a printer. W Data acquisition is via any or all of the six inputs on the front of the unit. The system assembly board centres on the 68070 16/32 bit CPU. It is accompanied by powerful data acquisition ASIC’s that analyze the data received from the target system. An interface is used to ensure that the acquisition system is fully compatible with that of the CPU architecture. The system assembly board also contains the circuitry required to interface with the keyboard, disk drive, the CRT and the output ports.