The l_Q-870/l 170 is a small, light-weight, low-cost printer that provides advanced paper handling and is compatible with The LQ-5 10/550. The printer’s main features are: REV.-A ● Use of ESC/P 2 control codes The printer can print fonts in various point sizes and receive and print raster graphic images. ● Compatibility with LQ and SQ series printers ● Printing speeds: 300 characters per second (CPS) in high-speed draft mode at 10 characters per inch (cpi) 330 cps (draft, 12 cpi) 275 cps (draft, 10 cpi) 1 1 0 cps (LQ, 12 cpi) 9 2 cps (LQ, 10 cpi) ● Multiple fonts resident in the printer: nine letter quality (LQ) fonts (Roman, Saris Serif, Courier, Prestige, Script, OCR-B, Script-C, Orator, and Orator-S) and one draft font ● Clear, easy-to-read printing using standard EPSON fonts ● Selection of fonts, condensed printing, and the cut-sheet feeder (C SF) bin using control panel buttons ● Advanced paper handling Continuous paper: Three ways to insert continuous paper, using the front, bottom, or rear paper entrance Auto backout and auto loading when using the front or rear paper entrance Ability to use continuous paper without removing the cut-sheet feeder Ability to use the standard tractor in three positions (two push tractor positions and one pull tractor position) Single-sheet paper: Two ways to insert single-sheet paper, using the front or top paper entrance Auto loading ● Easy handling of single-sheet paper with the optional cut-sheet feeder ● Optional tractor that can be used to create a push-pull tractor feeding ● Optional interface cards The LQ-870/l 170 is equipped with the standard EPSON 8-bit parallel interface. The optional interface cards ensure compatibility with a wide variety of computers. Table 1-1 Lists the optional interface cards, Table 1-2 lists the optional units available for the LQ-8 70/1 170, and Figure 1-1 shows an exterior view of the LQ-870/ 1170.