Your Fluke Model 8060A is a handheld, microcomputer-based 41⁄2 digit multimeter that is ideally suited for use in the field, laboratory, shop, or home. The 8060A has all the features that have become accepted standards for quality handheld multimeters, as well as some new features that have not been offered before in a handheld multimeter. New features include the following: • True rms measurements for ac signals up to 100 kHz. • Frequency measurements up to 200 kHz. • Voltage measurements in dBm referenced to 600Ω or in dB relative to an operator-selected reference voltage. • Resistance measurements up to 300 MΩ. • Ability to store any input signal as an offset or relative reference value. Other features include: • Functions: All standard DMM measurement functions, such as ac and dc volts and ac and dc current, as well as resistance, conductance, continuity, and diode test. • Ranges: Leading zero suppression. Automatic polarity. Overrange indication. Protection from overloads and transients up to 1500V peak. Dual-slope integration a/d conversion to ensure noise-free measurements. Autoranging MΩ resistance range (to 300 MΩ), as well as four fixed resistance ranges from 200Ω to 200 kΩ. • Operator Convenience: 41⁄2 digit Liquid Crystal Display. Software-controlled self-test routines for quick verification of internal circuitry and operation. • Power: 170 hours of continuous operation can be expected from a 9V alkaline battery (NEDA 1604). Low battery voltage is automatically detected and displayed. The low battery indication, BT, appears on the display when about 20% of the battery life remains. A full line of accessories is available to enhance the capabilities of the 8060A.