Hameg - HM5012 - Spectrum analyzer
Manufacturer:
Equipment:
HM5012
Date:
Category:
Group:
Sub Group:
Information
HM5012 & HM5014, the Spectrum Analyzers
for EMC Measurements
Continuous frequency range from 150 kHz to 1050 MHz.
Amplitude range from -100 dBm to +13 dBm (7 dBμV to 120
dBμV) 80 dB on-screen
Resolution bandwidths of 9 kHz, 120 kHz, 400 kHz
Intermodulation-free dynamic range 75 dB
Save / Recall
Technical Characteristics
The new spectrum analyzer
HM5012 and
HM5014 is
based in general on the high frequency characteristics of the
HM5010 and the
HM5011 analyzers. The usable frequency
range is therefore from 150 kHz to above 1 GHz. The
available resolution bandwidths are 9kHz, 120kHz and 400
kHz. Completely new is primarily the processor-controlled
operation and a digital signal display which works in real-
time, and is resolved with up to 2000 points over the entire
screen. The screen will also display all selected frequency
settings and the marker results.
The unique features of this spectrum analyzer are the
extensive EMC measurement capabilities. These include
the amplitude indication in Peak and Average modes. For the
precise evaluation of the signals a marker is provided that will
give a readout for amplitude and frequency on-screen.
An additional advantage is that newly acquired signals
can be compared with the content of the reference storage.
Complicated and repeatedly used equipment adjustments
can be saved by use of the Save/Recall function.
Schematics diagram
Manual type:
Schematics diagram
Pages:
40
Size:
6.3 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
Aug. 28, 2017
MD5:
66fa9906-e450-a6b7-892f-fdaba22e7efb
Downloads:
972