Kikusui
COR5500U series Oscilloscopes are available in eight
models, with different combinations of frequency bandwidths
and a digital storage function to best suit your
applications. The eight modes are:
COR5501U: 100MHz
Oscilloscope, with 20MS/s digital storage
COR5500U: 100MHz
Oscilloscope
COR5561U: 60MHz
Oscilloscope, with 20MS/s digital storage
CORS560U: 60MHz
Oscilloscope
COR5541U: 40MHz
Oscilloscope, with 20MS/s digital storage
COR5540U: 40MHz
Oscilloscope
COR5521U: 20MHz
Oscilloscope, with 20MS/s digital storage
COR5520U: 20MHz
Oscilloscope
This manual is applicable to Models
COR5501U
COR5500U
COR5561U, and COR5560U oscilloscopes.
1.2 Features
(1) Easy to operate
You can easily use major functions of the
Oscilloscope which
employs a direct knob control system.
(2) Compact and light
COR5500U series is very compact and light for its
sophisticated functions and reliable performance. This has
become feasible through dexterous use of flush-mount components.
(3) CRT readout
The CRT readout displays various items of information on the
CRT screen, providing you with a powerful means for rapid
but accurate measurements.
(4) Comment display
You can display comments by using this feature. If your
Oscilloscope has the digital storage function and operates
with GPIB, the comment text you have written can be output
to an HP-GL plotter via GPIB.
(5) Alternate magnified sweeps
This feature allows you to magnify readily any portion of
the waveform you want to observe more closely. The timebase
can be magnified by 5,10, or 50 times. The Alternate
Magnified Sweep mode, which runs a main sweep and a
magnified sweep alternately, is also available.
(6) Sampling rate up to 20MS/s
The maximum sampling rate is 20MS/s. Each channel has an
8bit A/D
Converter, allowing you to store the single-shot
data from both channels simultaneously. In Single Trigger
Mode, you can capture frequency components up to 5.7MHz
(when Curve Interpolation is used).
(7) 4k words/channel memory capacity
Each channel has a 4k word memory, and resolution of 400
points per one division horizontally. The digitally stored
and reproduced waveforms closely resemble the original
analog ones.
COR5500U series has two 4k-word Saving Memory units. The
memory units are internally backed up so that the data is
not destroyed even if the power is turned off. The data is
maintained for a longer period.
(8) Repetitive mode
The
COR5501U can store repetitive signals up to 100MHz and,
COR5561U can store up to 60MHz in Random Sampling mode.
(9) Printing screen data for HP-GL plotter
If an optional GPIB
Interface (IFOl-COR) is attached to your
oscilloscope, waveforms and all readouts can be directly
output to a GPIB plotter if it accepts HP-GL commands.
Comments