Oriel - 68830 - Power supply
Manufacturer:
Equipment:
68830
Date:
1991
Category:
Group:
Sub Group:
Information
The
Oriel model
68830 power supply was designed to meet the
needs of the researcher who demands a highly regulated
source of high current for proper operation of light sources.
These sources are from tungsten lamps for VIS-NIR radiation
or from ceramic glowers for IR radiation. Constant current
operation of these sources of radiation is required whenever
a radiometric measurement is being made or whenever a highly
stable light output is needed.
The light sources will be operated in constant current mode
by the
Oriel Model
68830 power supply with the output
voltage being dependent on the load's impedance. A constant
current power supply regulates current even into a short
circuit, and the model
68830 is such a power supply. It is
also safely limited to 2d amperes or 300 watts. Any
resistive load which operates between 0-20 amperes and 0-50
volts, and dissipates less than 300 watts may be connected
to the
68830 power supply.
The
Oriel model
68830 does not only provide a controlled
source of current to such a wide variety of loads. It also
contains circuitry to allow for viewing the output current,
the output voltage, and the output power. There is provision
for remote monitoring of these output parameters. Remote
capability also includes an input for external control,
modulation, or photofeedback.
The
68830 Radiometric Power Supply was designed to be a
reliable and efficient source of direct current The main
power supply section usesxiff-line switching technology with
the resultant increase in power conversion efficiency,
reduction in weight, and wide input mains operation.
Service and user manual
Manual type:
Service and user manual
Pages:
23
Size:
1.6 MB
Language:
english
Revision:
Manual-ID:
WPNO.6
Date:
May 1991
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Sept. 6, 2017
MD5:
99f428ec-8edd-4bd7-8dad-f2873ad6b8c9
Downloads:
350