Orban - 105C - Effect Processor
Manufacturer:
Equipment:
105C
Date:
Category:
Group:
Sub Group:
Information
The Orban/Parasound Reverberation system represents a
significant advance in increasing the performance/cost ratio
of artificial reverberation generators. New concepts in
driving electronics for the
Hammond spring delay line have
resulted in the solution of problems typical to even the
highest priced units using this delay system.
The O/P Reverb is available in four models to meet a variety
of customer requirements.
MODEL
105A comes mounted behind a 1.5 x 9" panel, and is
designed to be mounted in mixing consoles using standard
modular strips. It has no internal power supply, and
requires + 15 volts of well-filtered DC at approximately 100 ma.
MODEL
105B is identical to model
105A except that an
internal power supply is provided, and the unit is powered
by the 110/220 volt AC line.
MODEL
105C is a 1 3/4" rack mounted version of the system.
It is self-powered from 110/220 volts AC. There is a
provision for the addition of a remote hard limiting
indicator lamp which can be mounted so that it can be easily
seen by the mixer.
MODEL
105D consists of two model 105C's, mounted on a single
1 3/4" rack panel.
The economy of the O/P reverberation system makes multiple
echo channels economically feasible for many smaller
studios. The
105D provides maximum space economy.
All versions are supplied with a plug-in 4-spring delay line
assembly, which is mounted separately from the electronics.
Service and user manual
Manual type:
Service and user manual
Pages:
8
Size:
1.0 MB
Language:
english
Revision:
Manual-ID:
Date:
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
Oct. 23, 2017
MD5:
c085a680-a0af-2ead-5f78-42f5dd90457f
Downloads:
1303