.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?

extended search


Tektronix SG 504 Generator
Manufacturer:
Model:
SG 504
Date:
1981
Class:
Type:
SubType:
Leveled Sine-Wave Generator

Information

The SG 504 provides a constant-amplitude sine wave over a frequency range from 245 MHz to 1050 MHz. Amplitude-reference sine waves of .05 MHz or 6.0 MHz (selected by internal switch) are provided. The output head has an output impedance of 50 ohms. The peak-to-peak voltage from the output head is adjusted by a calibrated five-turn potentiometer. The SG 504 Leveled Sine Wave Generator is designed for use in the TM 500 series power modules. The front-panel FREQUENCY MONITOR OUT connector provides at least a 0.3 V peak-to-peak signal at the selected output frequency (245 to 1050 MHz) for monitoring or external triggering. There is also a provision for frequency modulating the 245 to 1050 MHz output signal. When lit, the UNLEVELED light indicates a mismatched load or when the OUTPUT AMPLITUDE front-panel control should be turned counterclockwise. When the output head is disconnected from the front panel, the UNLEVELED light is also illuminated. Rear Interface connections are provided for the FM INPUT, FREQUENCY MONITOR OUT, and amplitude control. If the rear Interface is used, these front panel features must be disconnected. They cannot both be used at once.

show more

Service and User Manual
Manual type:
Service and User Manual
Pages:
72
Size:
18.18 Mbytes (19063155 Bytes)
Language:
english
Revision:
revised
Manual-ID:
070-1632-01
Date:
1981 08 01
Quality:
Scanned document, all readable.
Upload date:
2017 12 27
MD5:
d7ff13b23f8658791e45b5a72fd29cca
Downloads:
671

Information

SECTION 1 OPERATING INSTRUCTIONS 1-1 French Version German Version Japanese Version SECTION 2 SPECIFICATION AND PERFORMANCE CHECK 2-1 WARNING I The remaining portion of this Table of Contents lists servicing instructions that expose personnel to hazardous voltages. These instructions are for qualified service personnel only. SECTION 3 ADJUSTMENT 3-1 SECTION 4 MAINTENANCE AND INTERFACING INFORMATION 4-1 SECTION 5 CIRCUIT DESCRIPTION 5-1 SECTION 6 OPTIONS 6-1 SECTION 7 REPLACEABLE ELECTRICAL PARTS 7-1 SECTION 8 DIAGRAMS AND CIRCUIT BOARD ILLUSTRATION 8-1 SECTION 9 REPLACEABLE MECHANICAL PARTS AND EXPLODED VIEW 9-1 CHANGE INFORMATION

show more

Add Comment

* Required information

Comments

No comments yet. Be the first!