INTRODUCTION The TEKTRONIX 2336 Oscilloscope is a rugged, lightweight, dual-channel, 100-MHz instrument having a compact crt that provides a sharply defined trace. Its vertical system supplies calibrated deflection factors from 5 mV per division to 5 V per division. Sensitivity can be increased to at least 2 mV per division by the variable VOLTS/DIV VAR control. Trigger circuits enable stable triggering over the full bandwidth of the vertical system. The horizontal system provides calibrated sweep speeds from 0.5 s per division to 50 ns per division, along with delayed-sweep features, thus accommodating accurate relative-time measurements. A X10 magnifier circuit extends the maximum sweep speed to 5 ns per division when the SEC/DIV switch is set to 0.05 fxs per division. A 3 1/2 digit LCD {liquid crystal display) readout enables rapid measurement of time difference between any two points on the oscilloscope display. Both time measurement points are displayed simultaneously on the crt screen. The instrument is shipped with the following standard accessories： 2 Probe packages 1 Accessory pouch 1 Operators manual 1 Service manual 1 Accessory pouch, zip lock 1 Crt filter, clear plastic 2 1.0-A AGC fast-blow fuses 1 0.5-A AGC fast-blow fuse