Keithley 2016 Digital multimeter
Manufacturer:
Model:
2016
Date:
1999
Class:
Type:
SubType:
THD Multimeter
Manual type:
User Manual
Pages:
2
Size:
7.31 Kbytes (7486 Bytes)
Language:
english
Revision:
A
Manual-ID:
PA-698
Date:
1999 11 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2018 08 22
MD5:
555d5cc9afde561bb5504af7f2fd3031
Downloads:
770
Information
Measuring background noise in the presence of a signal with
the Models
2015 and 2016
Manual type:
User Manual
Pages:
46
Size:
420.71 Kbytes (430803 Bytes)
Language:
english
Revision:
A
Manual-ID:
2015-903-01
Date:
2001 12 01
Quality:
Electronic document, no scan, very well readable.
Upload date:
2018 08 22
MD5:
51b7fe31cfdfce71a439bb6c133ee45b
Downloads:
1213
Information
AC Signal Analysis
Using Models
2015
2015-P, and
2016 THD Multimeters
Quick Reference Guide
About this guide
This guide is designed to familiarize users with basic Model
2015/2015-P
2016/operations to analyze an AC input signal.
Operations include harmonic distortion measurements,
standard AC volts and frequency measurements, and frequency
spectrum analysis (Model 2015-P only).
This guide covers front panel operation and remote operation
over the GPIB or RS-232. The SCPI commands provided are
generic; actual syntax depends on the test programming lan-
guage being used.
Information in this guide is organized as follows:
Measurements overview – Summarizes the measurements used to
analyze an AC input signal.
Measuring harmonic distortion:
Harmonic distortion calculations – Shows how harmonic
distortion is calculated for the three measurement types;
THD, THD + noise, and SINAD.
Distortion measurement operations – Covers the various
operations (front panel and remote commands) used to
configure and measure distortion.
Distortion measurement examples – Includes an example to
measure total harmonic distortion (THD), and an example that
uses a source sweep to measure distortion and RMS volts.
Measuring AC volts and frequency – Provides the basic
procedure to measure AC volts or frequency.
Analyzing frequency spectrum (Model 2015-P only):
Basic peak analysis – Covers the commands used to measure
the peak amplitudes of the frequencies in the spectrum.
Includes a remote command sequence example to find and
measure the frequencies that have the three highest amplitudes.
Delta function – Covers the commands to measure the
difference in frequency and amplitude between two frequency
pointer positions. Includes a command sequence example.
Frequency list analysis – Covers the commands to create a
frequency list and return the amplitudes of the listed
frequencies. Includes a command sequence example.
Comments