Keithley - 2182 - Digital multimeter
Manufacturer:
Equipment:
2182
Date:
1998
Category:
Group:
Sub Group:
Information
The Model
2182 is a 7 1⁄2-digit high-performance digital
nanovoltmeter. It has two input
channels to measure voltage and temperature. The measurement
capabilities of the Model 2182
are explained in Section 2 of this manual (see “Measurement
overview”).
Features of the Model
2182 Nanovoltmeter include:
•
Ratio — Provides comparison readings between two voltage
inputs. Ratio performs
V1/V2.
•
Delta — Provides average difference of Channel 1 inputs.
Delta performs
(V1t1–V1t2)/2.
•
Enhanced Delta, Pulse Delta, and Differential Conductance —
The following tests can be performed when using a Model
2182/2182A with a Model
6220 or
6221 Current Source:
—
Delta - Uses a square wave output and a 3-point measurement
algorithm to cancel the effects of thermal EMFs.
—
Pulse
Delta (6221 and
2182A only) - Provides a pulse output
and a 3-point (or 2-point) measurement algorithm for testing
of temperature sensitive Device Under Test (DUT).
—
Differential Conductance - Uses a differential current
output and a 3-point moving
average algorithm to perform differential measurements.
•
mX+b and Percent — These calculations provide mathematical
manipulation of
readings.
•
Relative — Null offsets or establish baseline values.
•
Buffer — Store up to 1024 readings in the internal buffer.
•
Limits — Set high and low reading limits to test devices.
•
Internal Scanning — Scan the two input channels of the
Model 2182.
•
External Scanning — Scan the channels or matrix points of
Keithley Model 7001/7002
switching cards.
•
Setup Storage — Two instrument setups (user and factory
defaults) can be saved and
recalled.
•
Analog Output — With analog output gain set to one, a full
range input will result in a
1V analog output.
•
Remote
Interface — The Model
2182 can be controlled using
the IEEE-488 interface
(GPIB) or the RS-232 interface.
•
GPIB Programming Language — When using the GPIB, the
instrument can be
programmed using the SCPI or Model 182 (DDCs) programming
language.
•
Closed-cover Calibration — The Model
2182 can be calibrated
from either the front
panel or the GPIB.
User manual
Manual type:
User manual
Pages:
339
Size:
2.0 MB
Language:
english
Revision:
B
Manual-ID:
2182A-900-01
Date:
May 2017
Quality:
Electronic document, no scan, very well readable.
Upload date:
Aug. 22, 2018
MD5:
fafdfed7-1d7a-8e85-ec9b-88b59893d53b
Downloads:
663
Service manual
Manual type:
Service manual
Pages:
114
Size:
1.2 MB
Language:
english
Revision:
C
Manual-ID:
2182-902-01 Rev. C
Date:
September 2001
Quality:
Electronic document, no scan, very well readable.
Upload date:
July 23, 2020
MD5:
9f150f6a-7f0c-40c3-c09b-30c63a51cdf3
Downloads:
159