.....obsolete user manuals, a lot of repair manuals, free service manuals, rare schematic diagrams, usefull service instructions, pdf books, how to repair instructions, lost operating manuals, old handbooks, tons of part lists, hidden service bulletins, your instruction books, informative repair tips, complete disassembly routines.....


What are you looking for?

extended search


Fluke 77 Series III Digital multimeter
Manufacturer:
Model:
77 Series III
Date:
1998
Class:
Type:
SubType:
Multimeter

Information

Maximum Voltage Between any Terminal and Earth Ground Rated voltage Display Digital: 3,200 counts, updates 2.5/sec Analog: 31 segments, updates 25/sec Response Time of Digital Display V ac < 2 s V dc < 1 s W < 1s to 320 kW, < 2s to 3.2 MW, < 10 s to 32 MW Operating Temperature 0°C to 50°C Storage Temperature -40°C to 60°C Temperature Coefficient 0.1 x (specified accuracy)/°C (<18°C or >28°C) Electromagnetic Compatibility In RF field of 3 V/m on all functions. Total accuracy = Specified accuracy + 0.1% of range. Relative Humidity except 32 MW range 32 MW range only 0% to 90% (0°C to 35°C) 0% to 70% (35°C to 50°C) 0% to 80% (0°C to 35°C) 0% to 70% (35°C to 50°C) Altitude Operating: 2000 meters Storage: 12,000 meters Battery Type 9 V NEDA 1604 or 6F22 or 006P, or NEDA 1604A or 6LR61 Battery Life 2000 hrs typical with alkaline 1600 hrs typical with carbon zinc Continuity Beeper 4096 Hz Shock, Vibration per MIL-T-PRF 28800F Class III, Sinusoidal, Non Operating Size (H x W x L) 3.7 cm x 8.9 - 7.8 cm x 19 cm (1.5 in x 3.5 - 3.1 in x 7.49 in) Weight 365 g (12.9 oz) Safety 600 V CAT III and 1000 V CAT II per ANSI/ISA S82.01-1994, EN 61010-1: 1993, CSA C22.2 No 1010.1-92, UL 3111-1. EMC Regulations EN 61326-1 1997.

show more

Service Manual
Manual type:
Service Manual
Pages:
59
Size:
472.67 Kbytes (484011 Bytes)
Language:
english
Revision:
1
Manual-ID:
PN800604
Date:
unknown
Quality:
Scanned document, all readable.
Upload date:
2009 01 15
MD5:
8a459036c1e6e8d2ecd8942c766ab99c
Downloads:
1793

Information

This manual presents service information for the Fluke 77 Series III Multimeter. The manual includes a theory of operation, general maintenance procedures, performance tests, calibration procedures, troubleshooting information, a list of replaceable parts, and schematic diagrams. The following descriptions briefly describe each chapter in the manual. Chapter 1 Introduction and Specifications This chapter describes use of the Service Manual and application of special terminology (conventions) to describe the meter’s circuitry. A complete set of specifications appears at the end of this chapter. Chapter 2 Theory of Operation This chapter first categorizes instrument circuitry into functional blocks, with a description of each block’s role in overall operation. A detailed circuit description is then given for each block. These descriptions explore operation to the component level and fully support troubleshooting and repair procedures defined in Section 3. Chapter 3 Maintenance Provides complete maintenance information, from general maintenance and cleaning instructions to detailed troubleshooting and repair procedures to the component level. Troubleshooting and repair procedures rely heavily on both the Theory of Operation presented in Chapter 2 and the Schematic Diagrams shown in Section 5. Chapter 4 List of Replaceable Parts Includes parts lists for all standard assemblies. Information on how and where to order parts is also provided. Chapter 5 Schematic Diagrams Includes schematic for the A1 Main PCA.

show more

Service Manual
Manual type:
Service Manual
Pages:
59
Size:
1.27 Mbytes (1328723 Bytes)
Language:
english
Revision:
Rev. 1 11/99
Manual-ID:
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2008 01 14
MD5:
d1220780f7e6c165a355e682d0ed6c86
Downloads:
1376

Information

This manual presents service information for the Fluke 77 Series III Multimeter. The manual includes a theory of operation, general maintenance procedures, performance tests, calibration procedures, troubleshooting information, a list of replaceable parts, and schematic diagrams.

show more

Service Manual
Manual type:
Service Manual
Pages:
62
Size:
1.30 Mbytes (1368124 Bytes)
Language:
english
Revision:
1
Manual-ID:
PN 800604
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 29
MD5:
28cf63cd6a174570ecb64f62662735f5
Downloads:
759

Information

This manual presents service information for the Fluke 77 Series III Multimeter. The manual includes a theory of operation, general maintenance procedures, performance tests, calibration procedures, troubleshooting information, a list of replaceable parts, and schematic diagrams. The following descriptions briefly describe each chapter in the manual. Chapter 1 Introduction and Specifications This chapter describes use of the Service Manual and application of special terminology (conventions) to describe the meter’s circuitry. A complete set of specifications appears at the end of this chapter. Chapter 2 Theory of Operation This chapter first categorizes instrument circuitry into functional blocks, with a description of each block’s role in overall operation. A detailed circuit description is then given for each block. These descriptions explore operation to the component level and fully support troubleshooting and repair procedures defined in Section 3. Chapter 3 Maintenance Provides complete maintenance information, from general maintenance and cleaning instructions to detailed troubleshooting and repair procedures to the component level. Troubleshooting and repair procedures rely heavily on both the Theory of Operation presented in Chapter 2 and the Schematic Diagrams shown in Section 5. Chapter 4 List of Replaceable Parts Includes parts lists for all standard assemblies. Information on how and where to order parts is also provided. Chapter 5 Schematic Diagrams Includes schematic for the A1 Main PCA.

show more

Service Manual
Manual type:
Service Manual
Pages:
59
Size:
1.30 Mbytes (1363832 Bytes)
Language:
english
Revision:
1
Manual-ID:
PN 800604
Date:
unknown
Quality:
Electronic document, no scan, very well readable.
Upload date:
2014 11 30
MD5:
7d03391c46068325b06d2454d892304b
Downloads:
724

Information

The following descriptions briefly describe each chapter in the manual. Chapter 1 Introduction and Specifications This chapter describes use of the Service Manual and application of special terminology (conventions) to describe the meter’s circuitry. A complete set of specifications appears at the end of this chapter. Chapter 2 Theory of Operation This chapter first categorizes instrument circuitry into functional blocks, with a description of each block’s role in overall operation. A detailed circuit description is then given for each block. These descriptions explore operation to the component level and fully support troubleshooting and repair procedures defined in Section 3. Chapter 3 Maintenance Provides complete maintenance information, from general maintenance and cleaning instructions to detailed troubleshooting and repair procedures to the component level. Troubleshooting and repair procedures rely heavily on both the Theory of Operation presented in Chapter 2 and the Schematic Diagrams shown in Section 5. Chapter 4 List of Replaceable Parts Includes parts lists for all standard assemblies. Information on how and where to order parts is also provided. Chapter 5 Schematic Diagrams Includes schematic for the A1 Main PCA.

show more

Service Manual
Manual type:
Service Manual
Pages:
49
Size:
1.25 Mbytes (1314357 Bytes)
Language:
english
Revision:
1
Manual-ID:
800604
Date:
unknown
Quality:
Scanned document, all readable.
Upload date:
2016 01 28
MD5:
ccdbc4b360583f57c6d4dbbd93948c02
Downloads:
609

Information

The following descriptions briefly describe each chapter in the manual. Chapter 1 Introduction and Specifications This chapter describes use of the Service Manual and application of special terminology (conventions) to describe the meter’s circuitry. A complete set of specifications appears at the end of this chapter. Chapter 2 Theory of Operation This chapter first categorizes instrument circuitry into functional blocks, with a description of each block’s role in overall operation. A detailed circuit description is then given for each block. These descriptions explore operation to the component level and fully support troubleshooting and repair procedures defined in Section 3. Chapter 3 Maintenance Provides complete maintenance information, from general maintenance and cleaning instructions to detailed troubleshooting and repair procedures to the component level. Troubleshooting and repair procedures rely heavily on both the Theory of Operation presented in Chapter 2 and the Schematic Diagrams shown in Section 5. Chapter 4 List of Replaceable Parts Includes parts lists for all standard assemblies. Information on how and where to order parts is also provided. Chapter 5 Schematic Diagrams Includes schematic for the A1 Main PCA.

show more

Add Comment

* Required information

Comments

No comments yet. Be the first!