Icom - IC-M501EURO - Transceiver
Manufacturer:
Image 1 of 3
If you have any other photos or manuals for the
Icom IC-M501EURO
you can
upload the files here.
Equipment:
IC-M501EURO
Date:
2000
Category:
Group:
Sub Group:
Information
‘ GENERAL
• Frequency coverage : 156.025–157.425 MHz (Tx)
156.025–162.025 MHz (Rx)
• Mode : 16K0G3E (FM)
• Usable channels : All international and USA* channels
*availability depending on version
• Power supply requirement : 13.8 V DC (negative ground)
• Usable temperature range : –20°C to +60°C
• Frequency stability : ±10 ppm (–20°C to +60°C)
• Current drain (at 13.8 V DC) : Transmit at 25 W 6.0 A
Receive max. audio 1.2 A
• Antenna connector : SO-239 (50 Ω)
• Dimensions (projections not included) : 165(W)×110(H)×109.4(D) mm
• Weight : 1130 g
‘ TRANSMITTER
• Output power (at 13.8 V DC) : High 25 W
Low 1 W
• Modulation : Variable reactance frequency modulation
• Maximum frequency deviation : ±5.0 kHz
• Spurious emissions : 0.25 μW
• Adjacent channel power : 70 dB
• Residual modulation : 40 dB
• Audio harmonic distortion : Less than 10% at 60% deviation
• Audio frequency response : +1 dB to –3 dB of 6 dB octave from 300 Hz to 3000 Hz
• Microphone impedance : 600 Ω
‘ RECEIVER
• Receive system : Double conversion superheterodyne system
• Intermediate frequencies : 1st 21.7 MHz
2nd 450 kHz
• Sensitivity : 6 dBμ emf at 20 dB SINAD
• Squelch sensitivity : –10 dBμ at threshhold
• Adjacent channel selectivity : 70 dB
• Spurious response : 70 dB
• Intermodulation rejection ratio : 68 dB
• Hum and noise : 40 dB
• Audio output power (at 13.8 V DC) : 3.5 W typical at 10% distortion with an 4 Ω load
• Audio frequency responce : +1 dB to –3 dB of –6 dB octave from 300 Hz to 3000 Hz
1 Manual
Service manual
Manual type:
Service manual
Pages:
40
Size:
4.2 MB
Language:
english
Revision:
Manual-ID:
S-13702HZ-CD
Date:
Quality:
Electronic document, no scan, very well readable.
Upload date:
Jan. 14, 2011
MD5:
a6417de9-8e68-6977-2694-5cf4b2eb6581
Downloads:
884