Technical data Dimension of Free standing appliances with rounded outer door Height 85.0 cm Width 59.7 cm Depth 61.0 cm Weight 56 kg Electronic boards Service boards see spare part list Serial boards see on the boards itself DUB 4619 724 06781 Programing of version and programmed control board, see „Service“ and „Data set“ on rating plate of inner door: CB programmed 442311 Data set 442301 Basic control board, not programmed see on the board itself 4619 724 17411 Succession of programs Programs see program diagram Succession A1a - A3a - A5b - A6a - A7a Datas Energy Label Reference program A5b Energy Performance B Cleaning Performance A Drying Performance B Alarms Refill rinse aid Refill salt Options Zone washing Delay function Program information Start indicator Pre wash Main wash Drying End All programs will be locked after start. Changing the program or finishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer) A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position. Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program. Water Volume at alternating spray system Volume at alternating spray system (same level when selected zone washing as in the normal programs) Water Volume Level Regeneration 0.3 l 15 mm Back rinse 3x 1.0 l 60 mm Prewash 3.9 l 120 mm Main wash 3.2 l 118 mm Intermediate rinse 1 3.2 l 118 mm Intermediate rinse 2 3.2 l 118 mm Clear rinse 3.2 l 118 mm Safety/ overflow 8.5 l 141 mm Measuring the level Remove the coarse sieve, put in a measuring meter into the sump, measure the hight of the water level. Detergent max. Pre-wash 10 cm3 Main-wash 40 cm3 Rinse aid 135 cm3 6 Dosage steps 1 - 6 ml