The XDCA-55 HD Camera Adaptor (referred to as “the adaptor” hereafter) allows you to connect an XDCU-50 HD Camera Extension Unit to supply power to the camcorder and extend the distance over which camcorder input and output signals can be transmitted (maximum distance 100 m (328 feet)). Can be installed on the following camcorders • PMW-350K/350L 1) • PMW-320K/320L 1) • PMW-5002) 1) An optional CBK-CE01 50 Pin Interface and Digital Extender is required. 2) An optional CBK-HD02 SDI/COMPOSITE Input and 50 Pin Interface is required. Features HD digital transmission This adaptor supports bidirectional transmission of uncompressed HD digital signals between this adaptor and XDCU-50. The maximum transmission distance is 100 m (328 feet). You can transmit high-quality video signals regardless of cable length. Cable-free connection via 50-pin interface You can easily make a cable-free connection by connecting the camcorder connector of this adaptor directly to the camera adaptor connector of the camcorder (requires installation of optional interface). Monitor output connector Either main line video signals from the camcorder or return video signals from the XDCU-50 can be output as HDSDI signals. Return video selection button You can switch the monitor output to return video while the adaptor’s RET button is held down. Communication interfaces • Intercom (1 line) • Tally (red and green) • Trunk line (1 line)