Adtech Inc. SX/12-2 Network Analyzer
Manufacturer:
No picture available!
Maybe you can
upload
a pic for the
Adtech Inc. SX/12-2 ?
If you have any other manuals for the
Adtech Inc. SX/12-2 you can
upload
the files here.
Model:
SX/12-2
Date:
1992
Class:
Type:
SubType:
Information
The SX/12 Data Channel Simulator creates a controlled
environment for testing, tuning, or demonstrating data
communications equipment. Its delay buffer and error
Generator simulate the major characteristics of satellite
and terrestrial data channels. Delays and/or errors can be
selected to assist in hardware and Software performance
testing, stress testing, optimization, and off-line
development. Programs can be entered to simulate complex
error scenarios or test sequences. The SX/12 can also be
added to real data channels to insert additional delays or
errors to test their effects on the on-line communications
equipment.
Manual type:
User Manual
Pages:
147
Size:
4.16 Mbytes (4357726 Bytes)
Language:
english
Revision:
3.4a
Manual-ID:
Date:
1992 10 23
Quality:
Scanned document, all readable.
Upload date:
2017 01 06
MD5:
3c331a8af8748e2779ebd91723490be9
Downloads:
1229
Information
What’s New in This Version
New in This Manual, Version
3.4 ... XI
Enabling/Disabling the Error
Generator ... XI
Copying Parameters Between the East and West
Channels ... Xf
New Extended T1/E1 Simulation
Option ... XI
Chapter 1 : General Information
introduction ... 1-1
Manual Contents
... 1-1
SX/12
Description ... 1-1
Front
Pane! ... 1-1
Rear
Pane! ... 1-4
Full-Duplex Operation
... 1-4
Delay Generator
... 1-4
Error Generator
... 1-5
Data Clock
Generator ... 1-6
DCE/DTE and External Transmit Timing Options
... 1-6
Battery-backed Setups
... 1-7
Interface Signalling Lines
... 1-7
Keyboard
Lockout ... 1-7
SX/12
Bypass ... 1-7
SX/12
Loopback ... 1-8
SX/12 Asynchronous
Mode ... 1-9
Chapter 2 : Installation
Introduction
... 2-1
Installation ... 2-1
Setting the Line Voltage
... 2-1
initial Check Out
... 2-1
installing the Interface Module
... 2-2
Connecting the SX/12 to Two
DTE’s ... 2-2
Connecting the SX/12 to a DTE and a
DCE ... 2-4
Chapter 3 : Operation
Introduction
... 3-1
SX/12 LCD
Display ... 3-1
Setting the SX/12
Parameters ... 3-2
Setting the Data Rate
Parameter ...
... 3-2
Setting the Delay Parameter
... 3-3
Setting the Random Error Rate Parameters
... 3-3
Setting the Burst Error Parameters
... 3-3
Manuai Burst Error Triggering
... 3-4
Other SX/12 Operations
... 3-5
Disabiing/Enabling
Errors ... 3-5
Copying Error Parameters Between East and West
Directions ... 3-5
Entering the SX/12 Program Edit
Mode ... 3-5
Entering the SX/12 Keyboard Lockout
Mode ... 3-5
Entering the SX/12 Bypass Mode
... 3-6
Entering the SX/12 Outward Loopback Mode
... 3-6
Entering the SX/12 Inward Loopback
Mode ... 3-6
Entering the SX/12 Self Test
... 3-6
Simulating Only Channel
Delays ... 3-6
Simulating Only Channel Errors
... 3-7
Using the SX/12 in Asynchronous Applications
... 3-7
Chapter 4 : Programming
Introduction
... 4-1
Operation ... 4-1
Programming Examples
... 4-4
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from further commenting.
These terms and conditions are subject to change at any time and without notice.
Comments