Advantest Corporation D3186 Generator
Manufacturer:
No picture available!
Maybe you can
upload
a pic for the
Advantest Corporation D3186 ?
If you have any other manuals for the
Advantest Corporation D3186 you can
upload
the files here.
Model:
D3186
Date:
1994
Class:
Type:
SubType:
Pulse Pattern Generator
Information
D3186 is a high-performance pulse pattem Generator to
generate 7 types of pseudo-random (PRBS)
patterns from 2 M to 2&-1, programmable (WORD) patterns up
to 8M (2^3) bits, or frame patterns of
SDH or SONET structure at very high speed from 150 Mb/s to
12 Gb/s.
Moreover, a system, which is used to evaluate the bit error
rate of super-high speed optical
communication devices and compound semiconductors, can be
structured by combining D3186 with
the D3286 error detector.
The advantages of the D3186 include:
[Features]
Ф A high-precision synthesized clock Generator is built in.
0 16 types of frequency memories are provided for speedy
frequency setting.
Ф For PRBS patterns, mark ratio can be changed between 8 values.
@ For FRAME pattern, the type of payload can be selected
from WORD, PRBS and CID.
(S> ALTERNATE mode is available which changes over 2
patterns (WORD and FRAME) to
execute measurement.
О
Various types of application are available by using
differential data output (DATA, DATA),
differential clock output (CLOCK1, CLOCK1) and fixed
amplitude clock output (CLOCK2).
Ф
Amplitude, offset and terminator conditions can be
individually set for the differential data
output and the differential clock output each.
The terminator conditions can be selected
from among TO О V, TO -2 V or AC coupling.
®
From the motor drive type delay line, the phase of clock
output can be changed in steps of
1 ps resolution up to ±400 ps.
(1) Error can be added in repetition of 1 x 10-4 to 1 x
10*9, single or external control.
©
When error measurement is performed by using D3186 combined
with D3286 Error
Detector, the master slave function interlocks their patterns.
(ED The GPIB (IEEE 488) feature enables full remote control,
making it easy to construct a
measurement and test system.
The built-in floppy disk drive enables storing/calling the
set conditions and the content of
pattern setting. (MS-DOS® format)
Manual type:
User Manual
Pages:
227
Size:
6.37 Mbytes (6675592 Bytes)
Language:
english
Revision:
Manual-ID:
FOE-8324231F01
Date:
1999 01 01
Quality:
Scanned document, reading partly badly, partly not readable.
Upload date:
2016 08 07
MD5:
9cbd3e1cdacc2a8102dbf728d7be66c4
Downloads:
483
Information
...
4.1.1 Connecting Clock input
...
4.1.2 Setting Data Output
...
...
4.1.3 Setting Clock Output
...
4.1.4 Setting the Pattern
...
4.2 Setting the D3286
...
...
4.2.1 Setting Data input
...
...
4.2.2 Setting Clock input
...
4.2.3 Setting the Pattern
...
.. .
4.2.4 Setting Data Input P o la rity
...
...
4.2.5 Adjusting Clock D e la y
...
4.3 Connecting Signal Lines
...
5. G RIB
4-8
4-8
4-8
4-9
4-9
4-9
4-10
...
...
...
5-1
5.1 Outline of GPIB
...
5.2 Functional Specification ...
...
5.2.1 GPIB Specification ...
...
5.2.2 Interface Functions
...
5.3 Notes on GPIB U s a g e
...
5.4 Setting Device Address
... ...
5.5 Canceling Master/Slave Control Function
...
5.6 Program Message (Listener Format) .
...
5.6.1 Basic Format
...
...
5.6.2 Initialization Program Message
... ..
5.6.3 Service Request ("SRQ") Program Message .
... 5-12
5.6.4 Command Program Message (Remote Code)
... ..
(1) Clock frequency setting ...
...
(2) Pattern setting ...
... ..
(3) Output setting . ...
...
(4) Filing ...
...
...
(5) Calender/Clock operation
...
(6) GPIB and system setting . ...
... ...
(7) External SG control code s e ttin g
... ...
5.6.5 Word Pattern and Frame Pattern Settings .
...
(1) Setting word pattern ...
...
(a) Hex mode setting format
...
...
(b) Binary mode setting format:
... ...
(2) Setting frame pattern
...
(a) Hex mode setting format
...
...
(b) Binary mode setting format ...
...
5.7 Query Program Message and Response Message
...
5.7.1 What is Query Program Message?
... ... ... ..
5.7.2 Query Program Message and Response Message Formats
...
(1) Clock frequency setting
...
(2) Pattern setting
...
... 5-38
(3) Output setting
...
.
5-45
(4) Calender/clock operation
...
5-50
(5) GPIB and system setting
... 5-51
(6) External SG control code setting
... ...
... 5-52
5.8 Status Byte ...
...
... ... 5-53
5.9 Device Clear (SDC and DCL C o m m a n d
s) ... ... 5-54
5.10 initial State
...
... 5-55
5.10.1 initial State of Operation
...
... 5-55
5.10.2 Setup Parameter initialization
...
... ... 5-55
5.11 Program Example
...
... ... 5-61
5.11.1 Operation Condition Setup
...
... 5-61
5.11.2 Operation Condition Read
...
... 5-64
5.11.3 Word Pattern Setup (Hex mode)
... ... 5-66
5.11.4 Word Pattern Setup (Binary mode) .
... ... 5-70
6. F IL E F U N C T IO N
...
... 6-1
6.1 Outline
...
...
6.2 File Format ...
...
6.3 File Size ...
...
... 6-1
6-2
6-2
7. M E S S A G E D IS P LA Y
...
... 7-1
MPU Error Display ... ...
...
Low Battery Display ...
... ...
File Error Display .
...
Displays Relating to Delay Lines
...
8. C O N F IR M A T IO N OF S P E C IF IC A T IO N AN D F U
N C T IO N
...
8.1 Confirming Specification
... .
...
8.1.1 Confirming CLOCK o u tp u
t ...
8.1.2 Confirming CLOCK2 output
...
...
8.1.3 Confirming 1/2 CLOCK output ... ■ ... .
... · . - / ■ . · ■
8.1.4 Confirming 1/32 CLK TRIGGER signal
...
8.1.5 Confirming PATTERN TRIGGER signal
...
8.1.6 Confirming 1/4 RATE output
...
8.1.7 Confirming CLOCK1, CLOCK1 outputs
... 8-11
8.1.8 Confirming DATA, DATA outputs
...
8-16
8.2 Confirming Function
...
8.2.1 Connections and Basic Setup of D3186 and D3286
... ...
8.2.2 Confirming the frequency
... ... ..
8.2.3 Confirming the PRBS Pattern
...
8.2.4 Confirming the Word Pattern
...
...
9. SPECIFICATIONS
...
...
9.1
9.2
9.3
9.4
9.5
9.6
9.7
Operation Clock
...
Pattern
...
...
Main Input
...
Auxiliary Output S ig n a ls ... ...
...
Control Input Signals
...
...
System Functions
...
...
General Specifications
...
...
LIST OF ABBREVIATIONS
8-21
8-21
8-22
8-22
8-23
9-1
9-1
9-2
9-6
9-9
9-10
9-11
9-12
...
A-1
DIMENSIONAL OUTLINE DRAWING
... EXT-1
ALPHABETICAL INDEX
...
...
1-1
Add Comment
Terms and Conditions
These terms and conditions contain rules about posting comments. By submitting a comment, you are declaring that you agree with these rules:
- Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.
- You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.
- You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.
- The administrator has the right to edit, move or remove any comment for any reason and without notice.
Failure to comply with these rules may result in being banned from submitting further comments.
These terms and conditions are subject to change at any time and without notice.
{"commentics_url":"\/\/www.lost-manuals.com\/comments\/","page_id":756932,"enabled_country":false,"country_id":0,"enabled_state":false,"state_id":0,"enabled_upload":false,"maximum_upload_amount":3,"maximum_upload_size":5,"maximum_upload_total":5,"captcha":false,"captcha_url":"https:\/\/www.lost-manuals.com\/comments\/frontend\/index.php?route=main\/form\/captcha&page_id=756932","cmtx_wait_for_comment":"cmtx_wait_for_comment","lang_error_file_num":"A maximum of %d files are allowed to be uploaded","lang_error_file_size":"Please upload files no bigger than %.1f MB in size","lang_error_file_total":"The total size of all files must be less than %.1f MB","lang_error_file_type":"Only image file types are allowed to be uploaded","lang_text_loading":"Loading ..","lang_placeholder_country":"Your country","lang_placeholder_state":"Your state","lang_text_country_first":"Please select a country first","lang_button_submit":"Add Comment","lang_button_preview":"Preview","lang_button_remove":"Remove","lang_button_processing":"Please Wait.."}
{"commentics_url":"\/\/www.lost-manuals.com\/comments\/","auto_detect":false}
Comments