Icom - IC-745 - Transceiver
Manufacturer:
Image 1 of 1
If you have any other photos or manuals for the
Icom IC-745
you can
upload the files here.
Equipment:
IC-745
Date:
Category:
Group:
Sub Group:
Information
ALL BAND, ALL MODE, ALL SOLID-STATE
The IC-745 covers all the Amateur HF frequencies from 1.8MHz
to 29.700MHz, including the new three bands of 10MHz, 18MHz
and 24MHz. It offers not only SSB, but also CW, AM (Receive
only), FM (Option) and RTTY. All of the circuits in the
IC-745, including the driver and final power stages are
completely solid-state, and provide about 100 watts output.
GENERAL COVERAGE RECEIVER CAPABILITY
The IC-745 has capabilities for an all amateur band
transceiver as well as a general coverage receiver between
100KHz and 30MHz with continuous tuning. The Up-conversion
system using a high side IF and Microcomputer Control System
make these capabilities possible.
In addition to these, the low-pass filters and the band-pass
filters are selected by an electric signal from the CPU and
it makes a no tune-up system.
DUAL VFO
Dual VFO's controlled by a large tuning knob provide easy
access to split frequencies used in DX operation. Normal
tuning rate is in 10Hz increments and increasing the speed
of rotation of the main tuning knob shifts the tuning to
50Hz increments automatically. Pushing the tuning speed
button gives 1KHz tuning.
16 MEMORIES
Sixteen tunable memories are provided to store mode,
HAM/GENERAL COVERAGE mode, and frequency, and the RAM is
backed up by an internal lithium memory backup battery to
maintain the memories for up to seven years. Scanning of
frequencies, memories and bands are possible from the unit,
or from the IC-HM12 scanning microphone. Data may be
transferred between VFO's, or from VFO to memories.
OUTSTANDING RECEIVER PERFORMANCE
Utilizing an ICOM developed Double Balanced Mixer, the
IC-745 has a 100dB dynamic range. The 70.4515MHz first IF
virtually eliminates spurious responses, and a high gain
9.0115MHz second IF, with ICOM's PBT provides the ultimate
in selectivity. A deep IF notch filter, adjustable AGC and
noise blanker (can be adjusted to eliminate the woodpecker),
audio tone control, plus RIT provide clear reception even in
the presence of strong QRM or high noise levels. A low noise
receiver preamp provides exceptional reception sensitivity
as required.
TRANSMITTER
The transmitter features high reliability transistors in a
low IMD (—38dB ~100W), full 100% duty cycle (internal
cooling fan standard), 12 volt DC design. Quiet relay
selection of transmitter LPF's, transmit audio tone control,
monitor circuit (to monitor your own CW or SSB signal), XIT,
and a high performance speech processor enhance the IC-745
transmitter's operation. For the CW operator, optional keyer
and semi break-in are provided for smooth and fast keying.
OTHER FEATURES
All of the above features plus full function metering, SSB
and FM squelch, convenient large controls, a large selection
of filters, and a high visibility flourescent display make
the IC-745 your best choice for a superior grade HF base
transceiver.
2 Manuals
Service and user manual
Manual type:
Service and user manual
Pages:
38
Size:
4.8 MB
Language:
english
Revision:
Manual-ID:
A-0507
Date:
Quality:
Scanned document, all readable.
Upload date:
Jan. 26, 2014
MD5:
a6223597-42d3-1c96-33f8-2f239202df68
Downloads:
990
Service manual
Manual type:
Service manual
Pages:
126
Size:
18.0 MB
Language:
english
Revision:
Manual-ID:
A-0504
Date:
Quality:
Scanned document, all readable.
Upload date:
Jan. 26, 2014
MD5:
bea509eb-c1e5-f296-57b9-51b380a0b054
Downloads:
1217