Systems......................Compact cassette, 2-channel stereo Recording .... AC bias system (bias frequency: 85kHz) Erasing.............................................AC push-pull system Heads . . ."Permalloy Solid" recording/playback headx 1 Ferritte erasing head x 1 Motor.................... Electronically-controlled DC motor Fast Winding Time............... Approximately 80 seconds (C-60 tape) Wow and Flutter...............No more than 0.12% (WRMS) Frequency Response.........................Standard, LH tapes; 30 to 13,000Hz (40 to 11,000Hz, ±3dB) Chromium dioxide tape; 30 to 16,000Hz (40 to 12,000Hz, ±3dB) Signal-to-Noise Ratio...........................Dolby OFF; 48dB (standard and LH tapes) Dolby ON; 58dB (over 5kHz, standard and LH tapes) (When chromium dioxide tape is used, signal-to-noise ratio is further improved by 4.5dB over 5kHz) Inputs (Sensitivity/Maximum allowable input/lmpedance) MIC x 2; 0.3mV/63mV/20kß, 6mm<£> jacks (Reference Mic impedance; 600Ω to 20k£2) LINE x 2; 63mV/12V/50ka, Pin jacks REC/PB x 1; 10mV/2V/10ktt, 5P jack (DIN standard) Outputs (Reference level/Load impedance) LINE x 2; 450mV/50ki2, Pin jacks HEADPHONE x 1; 80mV/8£2, 6mm0, stereo jack REC/PB x 1; 450mV/50k£2, 5P jack (DIN standard) Semiconductors..........Amplifier section; 41 transistors (including 2 FETs) 28 diodes (including 3 zener diodes, 1 LED) Motor control section; 2 transistors, 1 diode Subfunctions.........................«Dolby system (ON OFF) with indicator lamp •Tape selector (STD/Cr02) Independently switchable bias and equalizer •Full-auto stop mechanism (in all modes of PLAY/REC/FF/REW) •Cassette compartment illumination Power Requirements .... AC120V, 60Hz (KCU model) AC220V, 50/60Hz (NB model) AC 120V, 220V and 240V (switchable) 50-60Hz (DV, DP model) Power Consumption........................... 15 watts (max.) Dimensions ................. 350(W) x 142(H) x 282(D) mm. 13-3/4(W) x 5-5/8(H) x 11-1/8 in. Weight ..................14 lb 9 oz (6.6 kg) (without package) Accessories...................................Stereo connecting cord with pin plugs x 2 Head cleaning kit x 1 Operating instructions x 1